2,571
edits
Changes
Jump to navigation
Jump to search
Mv series camera appnotes 4 rpi (view source)
Revision as of 19:59, 29 August 2023
, 19:59, 29 August 2023→Camera module list
Line 52:
Line 52:
We take MV-MIPI-IMX178M as an example to introduce the hardware installation method.+
−===== Power supply =====
=== Hardware Setup ===
=== Hardware Setup ===
+
+==== MV series cameras use the ADP-MV1 connection ====
MV series cameras need to use ADP-MV1 adapter board in order to connect to Raspberry Pi.
MV series cameras need to use ADP-MV1 adapter board in order to connect to Raspberry Pi.
−===== Connection of MV series camera and ADP-MV1 =====
−==== Connection of MV-MIPI-IMX178M and ADP-MV1 ====
The two are connected using 0.5 mm pitch*30P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside.
The two are connected using 0.5 mm pitch*30P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside.
{| class="wikitable"
{| class="wikitable"
Line 66:
Line 66:
|}
|}
−==== Connection of ADP-MV1 to Raspberry Pi ====
+===== Power supply =====
−The ADP-MV1 requires a separate 5V power supply and can be powered directly from the Raspberry Pi motherboard using a Dupont cable.[[File:ADP-MV1-MV-MIPI-X 07.jpg|center|thumb|800x800px|ADP-MV1 power supply|link=http://wiki.veye.cc/index.php/File:ADP-MV1-MV-MIPI-X_07.jpg]]
The ADP-MV1 requires a separate 5V power supply and can be powered directly from the Raspberry Pi motherboard using a Dupont cable.[[File:ADP-MV1-MV-MIPI-X 07.jpg|center|thumb|800x800px|ADP-MV1 power supply|link=http://wiki.veye.cc/index.php/File:ADP-MV1-MV-MIPI-X_07.jpg]]
===== Raspberry Pi Model B and B+ =====
===== Raspberry Pi Model B and B+ =====