ADP-MV1 Adapter Board Data Sheet/zh

From wiki_veye
Jump to navigation Jump to search

Adapter Board:ADP-MV1 DATA SHEET

转接板:ADP-MV1数据手册

1 Introduction 产品介绍

The ADP-MV1 board function is connector interface conversion, user IO, power IO,IIC etc,signal lead out.

The ADP-MV1 converts FPC 30pin interface of MV-MIPI-XXX camera to 15pin interface,Compatible with raspberry Pi or Nvidia CSI-2 interface.

The ADP-MV1 converts the power IO, trigger input and user IO pins in the FPC30 interface of the MV-MIPI-XXX series cameras into 2.54 pins and MX1.25 connectors for easy testing and integration.

ADP-MV1板的功能是将连接器接插件方式转换,用户IO、电源IO、IIC等信号引出。

ADP-MV1板将 MV-MIPI-XXX系列工业相机的FPC30接口转换为FPC15接口,兼容树莓派或者英伟达的CSI-2接口。

ADP-MV1板将 MV-MIPI-XXX系列工业相机的FPC30接口中的电源,触发输入,用户输出等引脚,转换为2.54插针和MX1.25连接器,易于测试、集成。

2 Product Picture 产品图片

PART NUMBER / 型号 FRONT VIEW / 正面图片 BACK VIEW / 背面图片 Camera Support / 适配摄像机模组
ADP-MV1
ADP-MV1
ADP-MV1
MV-MIPI-IMX178M
ADP-MV1-T J1/J3/J4 PINLIST
ADP-MV1 J1/J3/J4 PINLIST
ADP-MV1 J2 PINLIST

3 Board Pinlist 引脚说明

J1: CSI-2 Interface,Compatible with raspberry Pi or Nvidia CSI-2 interface

J1:CSI-2接口,兼容树莓派或者英伟达CSI-2接口

Pin NO. 引脚号 NAME 名称 Remarks 说明
1 GND
2 MIPI_L0_N
3 MIPI_L0_P
4 GND
5 MIPI_L1_N
6 MIPI_L1_P
7 GND
8 MIPI_CK_N
9 MIPI_CK_P
10 GND
11 ENABLE Camera Power Enable
12 NC
13 SCL 3.3V Level
14 SDA 3.3V Level
15 NC NC
J2:Connect to MV-MIPI-XXX Industry Camera J3

J2: 连接MV-MIPI-XXX系列工业相机 J3

Pin NO. 引脚号 NAME 名称 Remarks 说明
1 GND
2 VCC 5V
3 VCC 5V
4 VCC 5V
5 VCC 5V
6 GND
7 ENABLE Camera Power Enable
8 GND
9 MIPI_L0_N Lane 0 Negative
10 MIPI_L0_P Lane 0 Positive
11 GND
12 MIPI_L1_N Lane 1 Negative
13 MIPI_L1_P Lane 1 Positive
14 GND
15 MIPI_CK_N CLK Negative
16 MIPI_CK_P CLK Positive
17 GND
18 MIPI_L2_N Reserved 预留
19 MIPI_L2_P Reserved 预留
20 GND
21 MIPI_L3_N Reserved 预留
22 MIPI_L3_P Reserved 预留
23 GND
24 SCL_MV I2C SCL, 3.3V Level
25 SDA_MV I2C SDA, 3.3V Level
26 GPIO3 Reserved 预留
27 USER IO2 Multi-function Port 2,3.3V level;可配置输出2,3.3V电平标准
28 USER IO1 Multi-function Port 1,3.3V level;可配置输出1,3.3V电平标准
29 TRIGGER_I Hardware Trigger in,3.3V level;硬件触发输入,3.3V电平标准
30 GND
J3:Auxiliary Expansion Port 1

J3:辅助扩展口1

Pin NO. 引脚号 NAME 名称 Remarks 说明 Pin NO. 引脚号 NAME 名称 Remarks 说明
1 VCC 板内连接到 J2-2 2 GND
3 TRIGGER_I 板内连接到 J2-29 4 GND
5 USER IO1 板内连接到 J2-28 6 GND
7 USER IO2 板内连接到 J2-27 8 GND
9 GPIO3 板内连接到 J2-26 10 GND
11 SDA_MV 板内连接到 J2-25 12 SCL_MV 板内连接到 J2-24
13 SDA_USER 板内连接到 J1-14 14 SCL_USER 板内连接到 J1-13
注:

使用 J1-I2C :短接11-13,同时短接12-14。

使用 其它 I2C :断开11-13,断开12-14;SDA信号连接J3-11,SCL信号连接J3-12。

Links 相关链接:

mv_mipi_i2c.sh user guide:IO Control en

MV Series MIPI Camera Register Map:IO Control en 中文

J4:Auxiliary Expansion Port 2

J4:辅助扩展口2

Pin NO. 引脚号 NAME 名称 Remarks 说明
1 VCC 板内连接到 J2-2
2 GND
3 TRIGGER_I 板内连接到 J2-29
4 USER IO1 板内连接到 J2-28
5 USER IO2 板内连接到 J2-27
6 GPIO3 板内连接到 J2-26
7 GND
8 SDA_MV 板内连接到 J2-25
9 SCL_MV 板内连接到 J2-24
10 GND
Links 相关链接:

mv_mipi_i2c.sh user guide:IO Control en

MV Series MIPI Camera Register Map:IO Control en 中文

4 Schematic 原理图

Download schematic file

5 Board Dimension 尺寸图

Download dwg file here

6 PCBA 3D STP File(3D STP文件)

Download 3D STP file