C-MOUNT01

1 Product Picture 产品图片

Product Picture 产品图片	Product Picture 产品图片	Camera Support 支持的相机
C-MOUNT01	C-MOUNT01	MV-MIPI-IMX178M MV-MIPI-SC130M MV-MIPI-IMX296M MV-MIPI-IMX265M MV-MIPI-IMX264M RAW-MIPI-IMX462M

2 Attention 注意事项

2.1 Overview 概述

C-MOUNT01仅仅是一个C-MOUNT镜头固定座，为了适配MV系列和RAW系列摄像机，实际后焦法兰焦距略小于17.526mm，配合不同型号的摄像机模组，需要将镜头向远离传感器的方向调整。具体数值需要根据传感器的成像面高度决定。

C-MOUNT01 is only a C-MOUNT lens mount. In order to fit the MV series and RAW series camera, the actual Flange BFL distance is less than 17.526mm. With different camera modules,

the lens needs to be adjusted away from the sensor. The specific value needs to be determined according to the sensor's imaging surface height.

Not adjusted / 未调整	Adjusted / 向外调整

2.2 镜头向远离传感器方向偏移距离 “Da” 的计算：Calculation of lens offset distance “Da” away from the sensor

Da = Dc - ( H - Ds )

法兰后焦距 / Flange BFL ：Dc = 17.526mm

C-MOUNT01高度 / The Height of C-MOUNT01：H= 18mm

传感器底面到感光面的距离 / Distance from the bottom of the sensor to the effective image area：Ds

Parameter 参数表
Part NO. / 型号	Ds (mm)	Da(mm)
MV-MIPI-IMX296M	0.92	0.446
MV-MIPI-IMX178M	0.92	0.446
MV-MIPI-IMX265M	0.92	0.446
MV-MIPI-IMX264M	0.92	0.446
MV-MIPI-IMX287M	0.92	0.446
RAW-MIPI-IMX462M	0.62	0.146
MV-MIPI-SC130M	0.6	0.126

3 Dimension 尺寸图

C-MOUNT01 Dimensional Drawing

4 2D 文件

Download 2D file here

5 3D 文件

Download 3D file here