Difference between revisions of "CS-LAMP-IR Data Sheet"

From wiki_veye
Jump to navigation Jump to search
(Interface & Pin list)
(Introduction)
 
(One intermediate revision by the same user not shown)
Line 4: Line 4:
 
The CS-LAMP-IR module is a light source for the camera module, which is started when the ambient light brightness is insufficient at night to provide necessary brightness for the camera and improve the imaging effect of the camera module.
 
The CS-LAMP-IR module is a light source for the camera module, which is started when the ambient light brightness is insufficient at night to provide necessary brightness for the camera and improve the imaging effect of the camera module.
  
The light source of the CS-LAMP-IR module is infrared light with a wavelength of about 850nm.The module has a built-in ambient illumination sensor. When the ambient light reaches the specified illumination, the module automatically turns on the infrared light, and
+
The light source of the CS-LAMP-IR module is infrared light with a wavelength of about 850nm.The module has a built-in ambient illumination sensor. When the ambient light reaches the specified illumination, the module automatically turns on the infrared light, and outputs a synchronization signals to the camera module to inform the camera module to switch day and night mode.
 
 
outputs a synchronization signals to the camera module to inform the camera module to switch day and night mode.
 
  
 
=='''Technical Detail'''==
 
=='''Technical Detail'''==
<br />
 
 
{| class="wikitable"
 
{| class="wikitable"
 
!Technical Detail
 
!Technical Detail

Latest revision as of 22:38, 4 December 2019

查看中文

Introduction

The CS-LAMP-IR module is a light source for the camera module, which is started when the ambient light brightness is insufficient at night to provide necessary brightness for the camera and improve the imaging effect of the camera module.

The light source of the CS-LAMP-IR module is infrared light with a wavelength of about 850nm.The module has a built-in ambient illumination sensor. When the ambient light reaches the specified illumination, the module automatically turns on the infrared light, and outputs a synchronization signals to the camera module to inform the camera module to switch day and night mode.

Technical Detail

Technical Detail
Power Supply DC5V
Power Consumption 550mW
Detection Wavelength 390nm~700nm
IR LED Wave Length 850nm

Interface & Pin list

J1、J4 、J5 pins are connected in parallel, please choose them according to the situation.

J1

1 DC 5V
2 GND

J4

1 DC 5V
2 GND

J5

1 DC 5V
2 GND

J2

1 NIGHT_O Active High
2 GND
3 NIGHT_O_n   Active Low,  Open-Collector

Board Dimension

All data in millimeters are shown below.

CS-LAMP-IR CAD尺寸图