Difference between revisions of "CS-LAMP-IR Data Sheet"
| (12 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[CS-LAMP-IR Data Sheet/zh|查看中文]]<br /> | [[CS-LAMP-IR Data Sheet/zh|查看中文]]<br /> | ||
| − | + | <big><big><big>'''CS-LAMP-IR Data Sheet'''</big></big></big> | |
=='''Introduction'''== | =='''Introduction'''== | ||
The CS-LAMP-IR module is a light source for the camera module, which is started when the ambient light brightness is insufficient at night to provide necessary brightness for the camera and improve the imaging effect of the camera module. | The CS-LAMP-IR module is a light source for the camera module, which is started when the ambient light brightness is insufficient at night to provide necessary brightness for the camera and improve the imaging effect of the camera module. | ||
| − | The light source of the CS-LAMP-IR module is infrared light with a wavelength of about 850nm.The module has a built-in ambient illumination sensor. When the ambient light reaches the specified illumination, the module automatically turns on the infrared light, and outputs a synchronization signals to the camera module to inform the camera module to switch day and night mode. | + | The light source of the CS-LAMP-IR module is infrared light with a wavelength of about 850nm.The module has a built-in ambient illumination sensor. |
| + | |||
| + | When the ambient light reaches the specified illumination, the module automatically turns on the infrared light, and outputs a synchronization signals to the camera module to inform the camera module to switch day and night mode. | ||
=='''Technical Detail'''== | =='''Technical Detail'''== | ||
| Line 23: | Line 25: | ||
|850nm | |850nm | ||
|} | |} | ||
| + | [[File:CS-LAMP-IR-TOP Interface.jpg|thumb|CS-LAMP-IR-TOP Interface]] | ||
=='''Interface & Pin list'''== | =='''Interface & Pin list'''== | ||
| Line 35: | Line 38: | ||
|GND | |GND | ||
|} | |} | ||
| + | [[File:CS-LAMP-IR-003 BOT Interface.jpg|thumb|CS-LAMP-IR-003 BOT Interface]] | ||
'''J2''' | '''J2''' | ||
{| class="wikitable" | {| class="wikitable" | ||
| Line 65: | Line 69: | ||
|} | |} | ||
==Board Dimension== | ==Board Dimension== | ||
| − | |||
| − | |||
<br /> | <br /> | ||
| + | [[File:CS-LAMP-IR结构图纸.jpg|thumb|600x600px| CS-LAMP-IR CAD drawing / unit : mm|alt=|none]] | ||
| + | [[Media:CS-LAMP-IR CAD.dwg|Download dwg file here]] | ||
Revision as of 10:53, 13 February 2020
查看中文
CS-LAMP-IR Data Sheet
1 Introduction
The CS-LAMP-IR module is a light source for the camera module, which is started when the ambient light brightness is insufficient at night to provide necessary brightness for the camera and improve the imaging effect of the camera module.
The light source of the CS-LAMP-IR module is infrared light with a wavelength of about 850nm.The module has a built-in ambient illumination sensor.
When the ambient light reaches the specified illumination, the module automatically turns on the infrared light, and outputs a synchronization signals to the camera module to inform the camera module to switch day and night mode.
2 Technical Detail
| Technical Detail | |
|---|---|
| Power Supply | DC5V |
| Power Consumption | 550mW |
| Detection Wavelength | 390nm~700nm |
| IR LED Wave Length | 850nm |
3 Interface & Pin list
J1、J4 、J5 pins are connected in parallel, please choose them according to the situation.
J1
| 1 | DC 5V |
| 2 | GND |
J2
| 1 | NIGHT_O | Active High |
| 2 | GND | |
| 3 | NIGHT_O_n | Active Low, Open-Collector |
J4
| 1 | DC 5V |
| 2 | GND |
J5
| 1 | DC 5V |
| 2 | GND |
4 Board Dimension
