Difference between revisions of "CS-MIPI-IMX307 STARVIS Module"

From wiki_veye
Jump to navigation Jump to search
(Board Dimension)
(Features)
Line 21: Line 21:
 
*BLC, Digtal WDR, 2D/3D noise reduction, Anti-fog
 
*BLC, Digtal WDR, 2D/3D noise reduction, Anti-fog
 
*Brightness, Contrast, Sharpness, Saturation adjustable
 
*Brightness, Contrast, Sharpness, Saturation adjustable
 +
*Support firmware upgrade via USB disk
 
*Support [https://www.raspberrypi.org/products/ Raspberry PI], FPGA, ZYNQ, RK3288, RK3399, [https://www.nvidia.cn/autonomous-machines/embedded-systems/jetson-nano/ JETSON NANO],[https://www.nvidia.cn/autonomous-machines/embedded-systems/jetson-tx2/ TX2]
 
*Support [https://www.raspberrypi.org/products/ Raspberry PI], FPGA, ZYNQ, RK3288, RK3399, [https://www.nvidia.cn/autonomous-machines/embedded-systems/jetson-nano/ JETSON NANO],[https://www.nvidia.cn/autonomous-machines/embedded-systems/jetson-tx2/ TX2]
  

Revision as of 09:22, 16 January 2020

查看中文

CS-MIPI-IMX307 Data Sheet

Introduction

CS-MIPI-IMX307 is a high quality Sony STARVIS IMX307 image sensor custom designed add-on board for Raspberry PI.

It attaches to Pi by way of one of the small sockets on the board upper surface and uses the dedicated CSI interface, designed especially for interfacing to cameras.

CS-MIPI-IMX307 TOP


CS-MIPI-IMX307 BOT

Features

  • SONY IMX307 STARVIS Sensor, 1/2.8 inch 2 Mega
  • Built-in ISP processing
  • CSI-2 Interface
  • Uncompressed UYVY format, YUV422-8bit
  • Standard lens mount
  • IR-CUT circuit
  • BLC, Digtal WDR, 2D/3D noise reduction, Anti-fog
  • Brightness, Contrast, Sharpness, Saturation adjustable
  • Support firmware upgrade via USB disk
  • Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, JETSON NANO,TX2


Technical Detail

Technical Details
SENSOR
Sensor SONY IMX307LQD-C STARVIS
Pixels 2.07M pixels
Resolution 1920*1080
Image Size Diagonal 6.46 mm (Type 1/2.8)
Unit Cell Size 2.9um (H)*2.9um(V)
SNR1s Value 0.24lx
ISP
Frame Rate 1080p@25fps / 30fps, 720p@60fps / 50fps
Exposure Auto or Manual
White Balance Auto or Manual
Shutter 1/25(1/30)s to 1/50,000s
Slow Shutter Coming Soon
Denoising 2D/3D noise reduction
Image Setting Brightness, Contrast, Sharpness, Saturation,Flip, Mirror
Image Enhancement BLC, Digtal WDR, Defog
Day/Night Switch Manual or IR-CUT filter with external trigger
Lens & IR-CUT
Lens Support M12*0.5 or M16*0.5 depend on lens mount
Lens Mount with IR-CUT MTV12 or MTV16
Mounting Hole 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing
Interface
Connector 15PIN FPC, Compatible with Raspberry PI
Communication Interface IIC, 3.3VDC
Video Data Interface CSI-2 : 2 Data Lanes, CSI-2 YUV422-8bit Data Type, Datarate=594Mbps/lane
IR-CUT Control IR-CUT motor control, 3.3VDC
Day/Night External Trigger 3.3VDC to 5VDC compatibility
General
Operating Conditions -10℃~50℃, Humidity 95% or less, non-condensing
Power Supply 5VDC
Power Consumption 5VDC,1.4W
Dimension 38mm*38mm*10mm(not include lens and lens mount)


Interface & Pin list

CS-MIPI-IMX307-TOP INTERFACE
CS-MIPI-IMX307-BOTTOM INTERFACE

J1:Firmware Update

1 VBUS(5V)
2 D-
3 D+
4 GND

J3:Power Input

1 5VDC IN
2 GND

J4:Day/Night External Trigger

1 IR LED ON,Low level active
2 GND
3 RESERVE

J6:IRCUT Control

1 IRCUT1
2 IRCUT2

J7:Trigger IN,Strobe OUT

1 Trigger IN
2 GND
3 Strobe OUT

J8:CSI-2 Interface

1 GND
2 MIPI_L0_N
3 MIPI_L0_P
4 GND
5 MIPI_L1_N
6 MIPI_L1_P
7 GND
8 MIPI_CK_N
9 MIPI_CK_P
10 GND
11 NC
12 NC
13 SCL
14 SDA
15 NC


Board Dimension

CS-MIPI-IMX307 CAD drawing / unit : mm