Difference between revisions of "CS-MIPI-IMX307 STARVIS Module"

From wiki_veye
Jump to navigation Jump to search
(Introduction)
(Technical Detail)
Line 81: Line 81:
 
|-
 
|-
 
|Lens
 
|Lens
|Support M12*0.5 or M16*0.5 depend on lens mount
+
|MTV12 / MTV16 / CS
 
|-
 
|-
|Lens Mount with IR-CUT
+
|Lens Mount
|MTV12 or MTV16
+
|M12*P0.5 / M16*P0.5 / CS,IRCUT is optional
 
|-
 
|-
 
|Mounting Hole
 
|Mounting Hole

Revision as of 18:17, 27 March 2020

查看中文

CS-MIPI-IMX307 Data Sheet

Introduction

CS-MIPI-IMX307 is a highly cost-effective CSI-2 (MIPI) interface camera module, using SONY STARVIS IMX307 image sensor,

built-in excellent ISP image processing, convenient for customers to quickly integrate and release products.

CS-MIPI-IMX307 TOP


CS-MIPI-IMX307 BOT

Features

  • SONY IMX307 STARVIS Sensor, 1/2.8 inch 2 Mega
  • Built-in ISP processing
  • CSI-2 Interface
  • Uncompressed UYVY format, YUV422-8bit
  • Standard lens mount
  • IR-CUT circuit
  • BLC, Digtal WDR, 2D/3D noise reduction, Anti-fog
  • Brightness, Contrast, Sharpness, Saturation adjustable
  • Support firmware upgrade via USB disk
  • Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, JETSON NANO,TX2


Technical Detail

Technical Details
SENSOR
Sensor SONY IMX307LQD-C STARVIS
Pixels 2.07M pixels
Resolution 1920*1080
Image Size Diagonal 6.46 mm (Type 1/2.8)
Unit Cell Size 2.9um (H)*2.9um(V)
SNR1s Value 0.24lx
ISP
Frame Rate 1080p@25fps / 30fps, 720p@60fps / 50fps
Exposure Auto or Manual
White Balance Auto or Manual
Shutter 1/25(1/30)s to 1/50,000s
Slow Shutter Coming Soon
Denoising 2D/3D noise reduction
Image Setting Brightness, Contrast, Sharpness, Saturation,Flip, Mirror
Image Enhancement BLC, Digtal WDR, Defog
Day/Night Switch Manual or IR-CUT filter with external trigger
Lens & IR-CUT
Lens MTV12 / MTV16 / CS
Lens Mount M12*P0.5 / M16*P0.5 / CS,IRCUT is optional
Mounting Hole 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing
Interface
Connector 15PIN FPC, Compatible with Raspberry PI
Communication Interface IIC, 3.3VDC
Video Data Interface CSI-2 : 2 Data Lanes, CSI-2 YUV422-8bit Data Type, Datarate=594Mbps/lane
IR-CUT Control IR-CUT motor control, 3.3VDC
Day/Night External Trigger 3.3VDC to 5VDC compatibility
General
Operating Conditions -10℃~50℃, Humidity 95% or less, non-condensing
Power Supply 5VDC
Power Consumption 5VDC,1.4W
Dimension 38mm*38mm*10mm(not include lens and lens mount)


Interface & Pin list

CS-MIPI-IMX307-TOP INTERFACE
CS-MIPI-IMX307-BOTTOM INTERFACE

J1:Firmware Update

1 VBUS(5V)
2 D-
3 D+
4 GND

J3:Power Input

1 5VDC IN
2 GND

J4:Day/Night External Trigger

1 IR LED ON Low level active(Image to MONO),3.3VDC to 5VDC compatibility
2 GND
3 RESERVE

J6:IRCUT Control

1 IRCUT1
2 IRCUT2
Functional specifications
pin Signal polarity Image type Filter position
Mode 1 IRCUT1 + color Infrared cutoff
IRCUT2 -
Mode 2 IRCUT1 - mono Full wavelength pass
IRCUT2 +

J7:Trigger IN,Strobe OUT

1 Trigger IN
2 GND
3 Strobe OUT

J8:CSI-2 Interface

1 GND
2 MIPI_L0_N
3 MIPI_L0_P
4 GND
5 MIPI_L1_N
6 MIPI_L1_P
7 GND
8 MIPI_CK_N
9 MIPI_CK_P
10 GND
11 NC
12 NC
13 SCL 3.3VDC Level
14 SDA 3.3VDC Level
15 3.3VDC NC by default,How to use


Board Dimension

CS-MIPI-IMX307 CAD drawing / unit : mm

Download dwg file here