Changes

In this mode, the exposure parameters of the camera module can be configured manually or automatically.

In this mode, the exposure parameters of the camera module can be configured manually or automatically.

===Hardware connection of sync mode===

===Hardware connection of sync mode===

According to the following config method, J7-1 is used as the XVS signal and J7-2 as the XHS signal.

According to the following config method, J7-1 is used as the XVS signal and J7-2 as the XHS signal.(note: In version LV3.3, XHS signals no longer need to be connected)

XVS time sequence diagram：[[File:XVS Timeing.png|alt=XVS time sequence diagram|center|thumb|800x800px|XVS timing sequence diagram]]

XVS time sequence diagram：[[File:XVS Timeing.png|alt=XVS time sequence diagram|center|thumb|800x800px|XVS timing sequence diagram]]

====The method of connecting two cameras====

====The method of connecting two cameras====

[[File:CS-MIPI-IMX307双模组同步示意图.png|alt=CS-MIPI-IMX307双模组同步示意图|thumb|800x800px|CS-MIPI-IMX307 2 cameras sync mode |center]]

[[File:CS-MIPI-IMX307双模组同步示意图.png|alt=CS-MIPI-IMX307双模组同步示意图|thumb|800x800px|CS-MIPI-IMX307 2 cameras sync mode(note: In version LV3.3, XHS signals no longer need to be connected) |center]]

=====Jetson nano B01 config=====

=====Jetson nano B01 config=====

Reference link：[[CS-MIPI-X i2c/zh|cs_mipi_i2c.sh usage]]

Reference link：[[CS-MIPI-X i2c/zh|cs_mipi_i2c.sh usage]]