Difference between revisions of "Camera module Stream Mode manual"

Revision as of 17:22, 1 April 2020

查看中文

1 Applicable Product models

CS-MIPI-IMX307

2 The concept of stream mode

2.1 free running

In this mode, the camera module runs on its own.

2.2 stream sync mode

One camera module is configured in master mode, and the other camera modules are configured in slave mode.

The camera module in master mode outputs XVS and XHS signals, while the camera module in slave mode follows the master module for exposure and output data.

In this mode, the exposure parameters of the camera module can be configured manually or automatically.

3 Hardware connection of sync mode

3.1 The method of connecting two cameras

CS-MIPI-IMX307 2 cameras sync mode

3.1.1 Jetson nano B01 config

Reference link：cs_mipi_i2c.sh usage

set cam0 as master

./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 0 -b 7

set cam1 as slave

./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 8

3.2 Jetson TX2/Xavier 6 cameras sync mode connection and configration

6cam interposer board connected with 6 cameras

3.2.1 Jetson TX2/Xavier config

Reference link：cs_mipi_i2c.sh usage

set cam0 as master

./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 0 -b 30

set other 5 cameras as slave

./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 31

./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 32

./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 33

./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 34

./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 35

@@ Line 13: / Line 13: @@
 In this mode, the exposure parameters of the camera module can be configured manually or automatically.
 ===Hardware connection of sync mode===
-====The method of connecting two cameras ====
+====The method of connecting two cameras====
-<br />
+[[File:CS-MIPI-IMX307双模组同步示意图.png|alt=CS-MIPI-IMX307双模组同步示意图|thumb|800x800px|CS-MIPI-IMX307 2 cameras sync mode |center|link=http://wiki.veye.cc/index.php/File:CS-MIPI-IMX307%E5%8F%8C%E6%A8%A1%E7%BB%84%E5%90%8C%E6%AD%A5%E7%A4%BA%E6%84%8F%E5%9B%BE.png]]
-====Jetson TX2/Xavier 6 cameras connection====
+=====Jetson nano B01 config =====
+Reference link：[[CS-MIPI-X i2c/zh|cs_mipi_i2c.sh usage]]
+*set cam0 as master
-<br />
+<code>./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 0 -b 7</code>
+*set cam1 as slave
+<code>./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 8</code>
+====Jetson TX2/Xavier 6 cameras sync mode connection and configration====
+[[File:ADP-N1-6CAM YT0.95-4I.jpg|alt=6cam interposer board connected with 6 cameras|thumb|800x800px|6cam interposer board connected with 6 cameras|center|link=http://wiki.veye.cc/index.php/File:ADP-N1-6CAM_YT0.95-4I.jpg]]<br />
+=====Jetson TX2/Xavier config =====
+Reference link：[[CS-MIPI-X i2c/zh|cs_mipi_i2c.sh usage]]
+*set cam0 as master
+<code>./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 0 -b 30</code>
+*set other 5 cameras as slave
+<code>./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 31</code>
+<code>./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 32</code>
+<code>./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 33</code>
+<code>./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 34</code>
+./cs_mipi_i2c.sh -w -f streammode -p1 1 -p2 1 -b 35<br />