2,020
edits
Changes
Jump to navigation
Jump to search
Line 109:
Line 109: − +
Camera module Trigger Mode manual (view source)
Revision as of 19:58, 25 October 2020
, 19:58, 25 October 2020→Delay in trigger mode
'''''T<sub>total</sub> = tgdly + T<sub>exp +</sub> T<sub>trans +</sub>T<sub>isp+</sub>T<sub>mipi</sub>'''''
'''''T<sub>total</sub> = tgdly + T<sub>exp +</sub> T<sub>trans +</sub>T<sub>isp+</sub>T<sub>mipi</sub>'''''
'''''T<sub>total</sub>''''' ：the total trigger delay is the time from the trigger signal to the complete image output through the MIPI signal.
'''''T<sub>total</sub>''''' ：the total trigger delay is the time from the trigger signal to the complete image output through the MIPI signal. The following table is obtained by hardware measurement.
'''''tgdly'''''：trigger delay time, the following measurements are configured to 0. ''tgdly'' is valid only for Hardware trigger mode.
'''''tgdly'''''：trigger delay time, the following measurements are configured to 0. ''tgdly'' is valid only for Hardware trigger mode.