How to assemble camera module/zh
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
怎样组装摄像头模组并聚焦
1 镜头安装
- 撕掉sensor保护膜,注意手指不要触摸sensor表面。
- 镜头座与螺丝匹配选择
- 组装 拧紧螺丝,固定镜头,插上IR_CUT端子。
2 接口板安装(请根据具体型号参考)
3 FFC线插接
4 聚焦
组装完成后,将摄像头模组安装到对应平台,连接视频。
旋转镜头聚焦清晰。定焦镜头景深都比较大,可以前后微调镜头,使想要拍摄距离范围内物体都成像清晰。
注意不要用手接触镜头表面,也不要用非专业擦镜纸擦镜头表面。