Line 64: |
Line 64: |
| | | |
| === Hardware Setup === | | === Hardware Setup === |
| + | MV series cameras require an adapter board to access the Jetson platform. The following table shows the support status. |
| + | {| class="wikitable" |
| + | !Jetson Board |
| + | !adapter board |
| + | ! camera number |
| + | !Power |
| + | |- |
| + | |Nano A02 |
| + | |ADP-MV1 |
| + | |1 |
| + | |5V DC(Required) |
| + | |- |
| + | |Nano B01 |
| + | | ADP-MV1 |
| + | |1 |
| + | |5V DC(Required) |
| + | |- |
| + | |Nano 2GB |
| + | |ADP-MV1 |
| + | |2 |
| + | | 5V DC(Required) |
| + | |- |
| + | |TX2 NX |
| + | |ADP-MV1 |
| + | |2 |
| + | |5V DC(Required) |
| + | |- |
| + | |XAVIER NX |
| + | |ADP-MV1 |
| + | |2 |
| + | |5V DC(Required) |
| + | |- |
| + | | TX2 Devkit |
| + | |ADP-N4 |
| + | |6 |
| + | | 12V DC (Optional) |
| + | |- |
| + | |AGX Xavier |
| + | |ADP-N4 |
| + | |6 |
| + | |12V DC (Optional) |
| + | |- |
| + | |Orin series |
| + | | TODO |
| + | |TODO |
| + | | TODO |
| + | |} |
| + | |
| + | ==== Connection of MV-MIPI-IMX178M and ADP-MV1 ==== |
| + | The two are connected using 0.5 mm pitch*30P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside. |
| + | [[File:ADP-MV1-MV-MIPI-X 01.jpg|alt=ADP-MV1 to MV-MIPI-X|center|thumb|800x800px|ADP-MV1 to MV-MIPI-X]] |
| + | <br /> |
| + | |
| + | ==== Connection using ADP-MV1 (using Xavier NX as an example) ==== |
| + | |
| + | ===== Power supply ===== |
| + | The ADP-MV1 requires a separate 5V power supply and can be powered directly from the Jetson board using a Dupont cable. |
| + | [[File:ADP-MV1-MV-MIPI-X 07.jpg|alt=ADP-MV1 power supply|center|thumb|800x800px|ADP-MV1 power supply]] |
| + | <br /> |
| + | |
| + | ==== Connection with Xavier NX ==== |
| + | The Nano Series NX Series is connected in the same way. |
| + | [[File:MV camera and Xavier NX connection.jpg|alt=MV camera and Xavier NX connection|center|thumb|800x800px|MV camera and Xavier NX connection]] |
| + | <br /> |