2,021
edits
Changes
Jump to navigation
Jump to search
Line 176:
Line 176: + + + + −
Mv series camera appnotes 4 jetson (view source)
Revision as of 11:45, 10 May 2023
, 11:45, 10 May 2023→Connection with Nano and NX using ADP-MV1
The Nano Series and NX Series are connected in this way.
The Nano Series and NX Series are connected in this way.
[[File:MV camera and Xavier NX connection.jpg|alt=MV camera and Xavier NX connection|center|thumb|800x800px|MV camera and Xavier NX connection]]
[[File:MV camera and Xavier NX connection.jpg|alt=MV camera and Xavier NX connection|center|thumb|800x800px|MV camera and Xavier NX connection]]
==== Connection with Orin Nano and NX using ADP-MV1 ====
Use a 15P to 22 pin FFC Cable with the same side wire connection. Pay attention to the direction of the contact surface.
[[File:MV camera connect to Orin Nano and Orin NX.jpg|center|thumb|800x800px|MV camera connect to Orin Nano and Orin NX]]
<br />
<br />
==== Connection of MV-MIPI-CAM and ADP-N4 ====
==== Connection of MV-MIPI-CAM and ADP-N4 ====
The two are connected using 0.5 mm pitch*30P FFC cable with same direction. The cable must be inserted with the silver contacts facing outside.
The two are connected using 0.5 mm pitch*30P FFC cable with same direction. The cable must be inserted with the silver contacts facing outside.