Line 330: |
Line 330: |
| |N/A | | |N/A |
| |} | | |} |
− | ==== Connection of MV-MIPI-CAM and ADP-MV1 ==== | + | |
| + | ==== MV series cameras use the ADP-MV1 connection ==== |
| + | |
| + | ===== Connection of MV series cameras and ADP-MV1 ===== |
| The two are connected using 0.5 mm pitch*30P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside. | | The two are connected using 0.5 mm pitch*30P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside. |
| {| class="wikitable" | | {| class="wikitable" |
Line 340: |
Line 343: |
| |} | | |} |
| | | |
− | ==== Connection using ADP-MV1 ====
| + | ==== Power supply ==== |
− | | |
− | ===== Power supply =====
| |
| The ADP-MV1 requires a separate 5V power supply and can be powered directly from the Jetson board using a Dupont cable. | | The ADP-MV1 requires a separate 5V power supply and can be powered directly from the Jetson board using a Dupont cable. |
| [[File:ADP-MV1-MV-MIPI-X 07.jpg|alt=ADP-MV1 power supply|center|thumb|800x800px|ADP-MV1 power supply]] | | [[File:ADP-MV1-MV-MIPI-X 07.jpg|alt=ADP-MV1 power supply|center|thumb|800x800px|ADP-MV1 power supply]] |
− | <br />
| |
| | | |
− | ==== Connection with Nano and NX using ADP-MV1 ==== | + | ===== Connection with Nano and NX using ADP-MV1 ===== |
| The Nano Series and NX Series are connected in this way. | | The Nano Series and NX Series are connected in this way. |
| [[File:MV camera and Xavier NX connection.jpg|alt=MV camera and Xavier NX connection|center|thumb|800x800px|MV camera and Xavier NX connection]] | | [[File:MV camera and Xavier NX connection.jpg|alt=MV camera and Xavier NX connection|center|thumb|800x800px|MV camera and Xavier NX connection]] |
Line 354: |
Line 354: |
| Use a 15P to 22 pin FFC Cable with the same side wire connection. Pay attention to the direction of the contact surface. | | Use a 15P to 22 pin FFC Cable with the same side wire connection. Pay attention to the direction of the contact surface. |
| [[File:MV camera connect to Orin Nano and Orin NX.jpg|center|thumb|800x800px|MV camera connect to Orin Nano and Orin NX]] | | [[File:MV camera connect to Orin Nano and Orin NX.jpg|center|thumb|800x800px|MV camera connect to Orin Nano and Orin NX]] |
− | <br />
| + | |
− | ==== Connection of MV-MIPI-CAM and ADP-N4 ==== | + | ==== MV series cameras use the ADP-N4 connection ==== |
| + | |
| + | ===== Connection of MV series cameras and ADP-N4 ===== |
| The two are connected using 0.5 mm pitch*30P FFC cable with same direction. The cable must be inserted with the silver contacts facing outside. | | The two are connected using 0.5 mm pitch*30P FFC cable with same direction. The cable must be inserted with the silver contacts facing outside. |
| [[File:ADP-N4 and MV-MIPI-CAM.jpg|link=http://wiki.veye.cc/index.php/File:ADP-N4%20and%20MV-MIPI-CAM.jpg|center|thumb|800x800px|MV-MIPI-CAM to ADP-N4]] | | [[File:ADP-N4 and MV-MIPI-CAM.jpg|link=http://wiki.veye.cc/index.php/File:ADP-N4%20and%20MV-MIPI-CAM.jpg|center|thumb|800x800px|MV-MIPI-CAM to ADP-N4]] |
Line 366: |
Line 368: |
| * 12V DC is connected to J11, which needs to be powered by an external adapter. | | * 12V DC is connected to J11, which needs to be powered by an external adapter. |
| | | |
− | ===== Connection with TX2 Devkitand AGX Series using ADP-MV1 ===== | + | ===== Connection with TX2 Devkit and AGX Series using ADP-MV4 ===== |
| [[File:ADP-N4 to AGX XAVIER.jpg|alt=ADP-N4 to AGX XAVIER|center|thumb|800x800px|ADP-N4 to AGX XAVIER]] | | [[File:ADP-N4 to AGX XAVIER.jpg|alt=ADP-N4 to AGX XAVIER|center|thumb|800x800px|ADP-N4 to AGX XAVIER]] |
| [[File:ADP-N4 to AGX Orin.jpg|center|thumb|800x800px|ADP-N4 to AGX Orin]] | | [[File:ADP-N4 to AGX Orin.jpg|center|thumb|800x800px|ADP-N4 to AGX Orin]] |