1,602
edits
Changes
Jump to navigation
Jump to search
Line 25:
Line 25: − + − − (TODO picture) − − + − − (TODO picture) − − + − − (TODO picture) − − + − − (TODO picture) − Line 283:
Line 271: − (TODO picture)+ −
Mv series camera appnotes 4 rpi (view source)
Revision as of 18:01, 14 April 2022
, 18:01, 14 April 2022→Perform hardware trigger operation
==== Connection of MV-MIPI-IMX178M and ADP-MV1 ====
==== Connection of MV-MIPI-IMX178M and ADP-MV1 ====
The two are connected using 0.5 mm pitch*30P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside.
The two are connected using 0.5 mm pitch*30P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside.[[File:ADP-MV1-MV-MIPI-X 01.jpg|center|thumb|800x800px|ADP-MV1 to MV-MIPI-X|link=http://wiki.veye.cc/index.php/File:ADP-MV1-MV-MIPI-X_01.jpg]]
==== Connection of ADP-MV1 to Raspberry Pi ====
==== Connection of ADP-MV1 to Raspberry Pi ====
===== Power supply =====
===== Power supply =====
The ADP-MV1 requires a separate 5V power supply and can be powered directly from the Raspberry Pi motherboard using a Dupont cable.
The ADP-MV1 requires a separate 5V power supply and can be powered directly from the Raspberry Pi motherboard using a Dupont cable.[[File:ADP-MV1-MV-MIPI-X 07.jpg|center|thumb|800x800px|ADP-MV1 power supply|link=http://wiki.veye.cc/index.php/File:ADP-MV1-MV-MIPI-X_07.jpg]]
===== Raspberry Pi Model B and B+ =====
===== Raspberry Pi Model B and B+ =====
The two are connected using 1.0 mm pitch*15P FFC cable with opposite direction. Pay attention to the silver contacts facing side.
The two are connected using 1.0 mm pitch*15P FFC cable with opposite direction. Pay attention to the silver contacts facing side.[[File:MV-MIPI-X-RPI B 01.jpg|alt=MV camera and RPI connection|center|thumb|800x800px|MV camera and RPI connection|link=http://wiki.veye.cc/index.php/File:MV-MIPI-X-RPI_B_01.jpg]]
===== Raspberry Pi Zero, Zero W and Computer Module =====
===== Raspberry Pi Zero, Zero W and Computer Module =====
The two are connected using 15Pto22P FFC cable with same direction. Pay attention to the silver contacts facing side.
The two are connected using 15Pto22P FFC cable with same direction. Pay attention to the silver contacts facing side.[[File:MV-MIPI-X-RPI Z 01.jpg|center|thumb|800x800px|MV camera and Raspberry Pi zero connection|link=http://wiki.veye.cc/index.php/File:MV-MIPI-X-RPI_Z_01.jpg]]
=== piOS Configuration ===
=== piOS Configuration ===
For details on how to install the Raspberry Pi system, please refer to the official documentation at [https://www.raspberrypi.org/documentation/installation/ Install raspberry pi guide].
For details on how to install the Raspberry Pi system, please refer to the official documentation at [https://www.raspberrypi.org/documentation/installation/ Install raspberry pi guide].
====== Hardware Connection ======
====== Hardware Connection ======
[[File:MV-MIPI-X-RPI B TRIG 01.jpg|center|thumb|800x800px|MV camera hardware trigger connection|link=http://wiki.veye.cc/index.php/File:MV-MIPI-X-RPI_B_TRIG_01.jpg]]
====== Set mode ======
====== Set mode ======
<code>v4l2-ctl --set-ctrl <small>trigger_mode=1</small></code>
<code>v4l2-ctl --set-ctrl <small>trigger_mode=1</small></code>