2,021
edits
Changes
Jump to navigation
Jump to search
Line 315:
Line 315: − + Line 339:
Line 339: + + + + + Line 395:
Line 400: − +
→List the data formats supported by the camera
<small><code> Size: Discrete 3088x2064</code></small>
<small><code> Size: Discrete 3088x2064</code></small>
<br />
<br />On Raspberry Pi 5, the actual supported image formats depend on the capabilities of the camera, not the list provided here.
====== List the configurable parameters of the camera implemented in the driver ======
====== List the configurable parameters of the camera implemented in the driver ======
<code>v4l2-ctl --get-ctrl [ctrl_type]</code>
<code>v4l2-ctl --get-ctrl [ctrl_type]</code>
Note: For Raspberry Pi 5, the -d parameter needs to be added to all commands in this section to specify the subdev used for configuring parameters.
For example, if executing ./media_setting_rpi5.sh or ./find_entity.sh prompts the use of /dev/v4l-subdev2 for parameter configuration, then <code>v4l2-ctl -L</code> should be changed to <code>v4l2-ctl -L -d /dev/v4l-subdev2</code>.
All the above functions can be implemented using [[Mv mipi i2c.sh user guide|mv_mipi_i2c.sh]].
All the above functions can be implemented using [[Mv mipi i2c.sh user guide|mv_mipi_i2c.sh]].
In streaming mode, the following commands can be used for frame rate statistics.
In streaming mode, the following commands can be used for frame rate statistics.
<code>v4l2-ctl --set-fmt-video=width=$WIDTH,height=$HEIGHT,pixelformat=GREY --stream-mmap --stream-count=-1 --stream-to=/dev/null</code>
<code>v4l2-ctl -d /dev/video0 --set-fmt-video=width=$WIDTH,height=$HEIGHT,pixelformat=GREY --stream-mmap --stream-count=-1 --stream-to=/dev/null</code>
===== Save image to file =====
===== Save image to file =====