Difference between revisions of "Power supply mode switching"

From wiki_veye
Jump to navigation Jump to search
Line 10: Line 10:
 
[[File:CS-MIPI-SC132-N004PWRS.jpg|alt=power mode switch|center|thumb|800x800px|CS-MIPI-SC132 power mode switch]]
 
[[File:CS-MIPI-SC132-N004PWRS.jpg|alt=power mode switch|center|thumb|800x800px|CS-MIPI-SC132 power mode switch]]
 
[[File:CS-MIPI-SC132-N04 IF.jpg|alt=CS-MIPI-SC132-BOTTOM INTERFACE|center|thumb|800x800px|CS-MIPI-SC132-BOTTOM INTERFACE]]
 
[[File:CS-MIPI-SC132-N04 IF.jpg|alt=CS-MIPI-SC132-BOTTOM INTERFACE|center|thumb|800x800px|CS-MIPI-SC132-BOTTOM INTERFACE]]
CS-MIPI-SC132 support 2 power supply mode,  and '''''can not use at the same time.''''' The power consumption of this module is TBD, please ensure adequate power supply capacity.
+
CS-MIPI-SC132 support 2 power supply mode,  and '''''can not use at the same time.'''''
 +
 
 +
'''The default power supply mode is 3.3V power supply from FFC cable, and 5V power supply mode is used when upgrading firmware.'''
 +
 
 +
The power consumption of this module is 1.16W, please ensure adequate power supply capacity.
  
 
*Power mode switch :Open circuit ——  using J3 2.54mm connector power supply,5V.
 
*Power mode switch :Open circuit ——  using J3 2.54mm connector power supply,5V.

Revision as of 19:41, 9 July 2020

查看中文

1 CS-MIPI-IMX307 Power Supply Mode Switching User Guide

power mode switch
CS-MIPI-IMX307 power mode switch


CS-MIPI-IMX307-BOTTOM INTERFACE
CS-MIPI-IMX307-BOTTOM INTERFACE

CS-MIPI-IMX307 support 2 power supply mode, and can not use at the same time. The power consumption of this module is 1.4W, please ensure adequate power supply capacity.

  • Power mode switch :Open circuit —— using J3 2.54mm connector power supply,5V.
  • Power mode switch :Short circuit —— using J8 FFC cable power supply,3.3V.

2 CS-MIPI-SC132 Power Supply Mode Switching User Guide

power mode switch
CS-MIPI-SC132 power mode switch
CS-MIPI-SC132-BOTTOM INTERFACE
CS-MIPI-SC132-BOTTOM INTERFACE

CS-MIPI-SC132 support 2 power supply mode, and can not use at the same time.

The default power supply mode is 3.3V power supply from FFC cable, and 5V power supply mode is used when upgrading firmware.

The power consumption of this module is 1.16W, please ensure adequate power supply capacity.

  • Power mode switch :Open circuit —— using J3 2.54mm connector power supply,5V.
  • Power mode switch :Short circuit —— using J8 FFC cable power supply,3.3V.