Line 422: |
Line 422: |
| <code>./veye_mipi_i2c.sh -r -f aespeed</code> | | <code>./veye_mipi_i2c.sh -r -f aespeed</code> |
| | | |
− | <code>./veye_mipi_i2c.sh -w -f aespeed -p1 0x32</code> | + | <code>./veye_mipi_i2c.sh -w -f aespeed -p1 0x32 -p2 0x32</code> |
| | | |
− | AE adjust speed,Slow to Fast: [0,0x64] | + | AE adjust speed,p1 is agc speed, p2 is shutter speed,Slow to Fast: [0,0x64] |
| + | =====contrast===== |
| + | <code>./veye_mipi_i2c.sh -r -f contrast</code> |
| + | |
| + | <code>./veye_mipi_i2c.sh -w -f contrast -p1 0x32</code> |
| + | |
| + | Contrast,range: [0,0xFF],default: 0x80. |
| + | |
| + | =====saturation===== |
| + | <code>./veye_mipi_i2c.sh -r -f saturation</code> |
| + | |
| + | <code>./veye_mipi_i2c.sh -w -f saturation -p1 0x32</code> |
| + | |
| + | Saturation, range: [0,0x64]. |
| + | |
| + | ===== sharppen ===== |
| + | <code>./veye_mipi_i2c.sh -r -f sharppen</code> |
| + | |
| + | <code>./veye_mipi_i2c.sh -w -f sharppen -p1 [val1] -p2 [value]</code> |
| + | {| class="wikitable" |
| + | !param1 value |
| + | !description |
| + | |- |
| + | |0x0 |
| + | | sharppen disable |
| + | |- |
| + | |0x1 |
| + | | sharppen enable |
| + | |}default: 0x1 |
| + | |
| + | param2: sharppen strength, range [0x0-0xA] |
| + | =====wdrtargetbr===== |
| + | <code>./veye_mipi_i2c.sh -r -f wdrtargetbr</code> |
| + | |
| + | <code>./veye_mipi_i2c.sh -w -f wdrtargetbr -p1 0x80</code> |
| + | |
| + | The overall AE target value in WDR mode. |
| + | |
| + | Takes effect in WDR mode. range: [0-0xFF], default : 0x80. |
| + | =====wdrbtargetbr===== |
| + | <code>./veye_mipi_i2c.sh -r -f wdrbtargetbr</code> |
| + | |
| + | <code>./veye_mipi_i2c.sh -w -f wdrbtargetbr -p1 0x80</code> |
| + | |
| + | The AE target value of the bright area in WDR mode. |
| + | |
| + | Takes effect in WDR mode. range: [0-0xFF], default : 0x80. |
| <br /> | | <br /> |