Difference between revisions of "USB firmware update app note"

From wiki_veye
Jump to navigation Jump to search
(Prepare)
(Applicable Product modles)
Line 3: Line 3:
 
This AN  introduces how to upgrade the firmware of camera module by using U disk through USB interface.
 
This AN  introduces how to upgrade the firmware of camera module by using U disk through USB interface.
  
===Applicable Product modles===
+
===Applicable Product models===
  
 
*CS-MIPI-IMX307
 
*CS-MIPI-IMX307

Revision as of 17:33, 27 March 2020

查看中文

This AN introduces how to upgrade the firmware of camera module by using U disk through USB interface.

Applicable Product models

  • CS-MIPI-IMX307
  • CS-LVDS-IMX307
  • CS-USB-IMX307
  • CS-MIPI-SC132
  • CS-LVDS-SC132
  • CS-USB-SC132

How to upgrade camera firmware using USB disk

Prepare

  • Get the upgrade file via link,or other way. The default file name is ProductMode_Version_Releasedata.bin.
  • Formatting your Usb Disk to FAT32.
  • Rename upgrade file name to dimaging_upgrade.bin and copy to root dir of USB disk.

Upgrading

  • Plug in the USB disk as shown belown when power off.
CS-USB-IMX307
CS-MIPI-IMX307
  • Power on. Notice that USB camera module using power port instead of commonly used USB port. MIPI camera module using 5V power port,disconnect FFC line.
  • The camera module will check the upgrade file. If LED light ON for 500ms and OFF, means upgrading begin. If LED ON for > 2s, means upgrade file wrong.
  • LED ON and OFF for 3 times, means upgrading OK. Power off.
  • If LED stays ON, this means upgrading failed,please check the upgrade file.