Changes

Jump to navigation Jump to search
Line 1: Line 1:  
[[VEYE MIPI 290/327 for Raspberry Pi/zh|查看中文]]
 
[[VEYE MIPI 290/327 for Raspberry Pi/zh|查看中文]]
   −
'''This document is a work in progress.'''
+
'''[[VEYE-MIPI-290/327 for Raspberry Pi|<big><big><big><big>How to use VEYE-MIPI-290/327 camera module on Raspberry Pi</big></big></big></big>]]'''
 
  −
'''How to Use Veye Mipi Camera with Raspberry Pi'''
      
===Introduction===
 
===Introduction===
VEYE-MIPI-290/327 is a is a special camera module which is compatible with RASPBERRY PI. She use SONY STARVIS sensor——IMX290/IMX327 and has excellent ISP functions build-in.The output format is stanard UYVY stream. It is very easy to use it with RASPBERRY PI.Of course, she also has some subtle differences with the official version. She only support 1080p resolution,and i2c cmd is different.
+
VEYE-MIPI-290/327 is a is a special camera module which is compatible with RASPBERRY PI. It use SONY STARVIS sensor——IMX290/IMX327 and has excellent ISP functions build-in.The output format is stanard UYVY stream. It is very easy to use it with RASPBERRY PI.Of course, she also has some subtle differences with the official version. She only support 1080p resolution,and i2c cmd is different.
    
Theoretically,VEYE Camera Modules support all Raspberry Pi. For performance reasons, I recommend you use 3,3+,4 version.  This article uses Raspberry Pi 3B as an example to explain how the VEYE-MIPI-290/327 camera module working with  Raspberry Pi.  It also explain the specials  of RPI Computer Module and Zero using VEYE Camera Module.  
 
Theoretically,VEYE Camera Modules support all Raspberry Pi. For performance reasons, I recommend you use 3,3+,4 version.  This article uses Raspberry Pi 3B as an example to explain how the VEYE-MIPI-290/327 camera module working with  Raspberry Pi.  It also explain the specials  of RPI Computer Module and Zero using VEYE Camera Module.  
   −
===Hardware Assembly===
+
===Hardware Setup===
<br />
+
'''Essentials You Need:'''
 +
 
 +
*Raspberry PI Items : RPI, Network, MicroSD Card, Power, Monitor
 +
*Camera Module Items : VEYE-MIPI-290/327,FFC,Dupont Wire,Lens,Adaptor Board. (We developed 2 types of adaptor boards, [[Mini Adapter Board|Mini Adaptor Board]] and [[Adapter Board for Raspberry Pi|Adaptor Board]]. Mini board only support Standard RPI,Adaptor Board support both Standard RPI and CM & Zero.)
 +
 
 +
'''Setup guide'''
 +
 
 +
*Connect the VEYE Camera Module the CSI-2 port using FFC Cable('''type B''').
 +
*Connect Dupont Wire as shown below. VEYE-MIPI-290/327 need an addtional power.
 +
*Startup RaspberryPi.
 +
 
 +
[[File:Mini adpter with VEYE-MIPI-290-327 front.jpg|center|thumb|Mini adpter with VEYE-MIPI-290-327 front|alt=|600x600px]]
 +
[[File:Mini adpter with VEYE-MIPI-290-327 back.jpg|center|thumb|Mini adpter with VEYE-MIPI-290-327 back|alt=|600x600px]]
 +
 
 +
 
 +
 
 +
<br />[[File:Veye-raspberry 3m.jpg|center|thumb|600x600px|Connect VEYE to RPI]][[File:Veye-Wiring scheme01.jpg|center|thumb|600x600px|Connect VEYE to RPI (part1)]]<br />[[File:Veye 290-327Wiring scheme00.jpg|center|thumb|600x600px|Connect VEYE(mini adaptor board) to RPI (part2)]]
 
===RaspberryPi System Setup and Configuration===
 
===RaspberryPi System Setup and Configuration===
 +
 +
*Setup RasapberryPi System,reference this [https://www.raspberrypi.org/documentation/installation/ link].
 +
*Go to the main menu and open the Raspberry Pi Configuration tool. Enable ''Camera'' and ''I2C'' interface.
 +
 +
<code>sudo raspi-config</code>
 +
[[File:Veye-Raspi-config.png|center|thumb|600x600px]]
 +
 +
*Enable SSH  and Samba services. <br />
    
===Sofware Toolkits Install===
 
===Sofware Toolkits Install===
 +
 +
====Toolkits downloading====
 +
There are two way to install software toolkits.
 +
 +
*1. Clone from github
 +
 +
<code>git clone https://github.com/veyeimaging/raspberrypi<nowiki/>.git</code>
 +
 +
*2. Downloading from github ([https://github.com/veyeimaging/raspberrypi link here]),  upload to RPI using samba or USB disk.
 +
 +
====Toolkits Overview====
 +
[[File:Rpi github overview.jpg|alt=|center|thumb|600x600px|Software Tookits on github]]
 +
Software toolkits contains three parts. ''veye_raspcam'' is raspcam alike Video Stream Toolkits, D_mipi_rpi is D-SDK Video Stream Toolkits, ''i2c_cmd'' is Video Control Toolkits.
 +
 +
*Video Stream Tookkits provides real-time display, capture, video recording, etc.
 +
*Video Control Toolkits is a shell script which provides ISP parameters configuration capbility.
 +
*Both is Open Source.<br />
    
===Video Stream Toolkits Manual===
 
===Video Stream Toolkits Manual===
    +
====veye_raspcam: raspcam alike toolkits====
 +
<code>cd raspberrypi/veye_raspcam/bin/</code>
 +
 +
<code>chmod +x *</code>
 +
 +
VS toolkits provides several ELF file.
 +
 +
*veye_raspipreview
 +
 +
<code>./veye_raspipreview -t 20000 -p '0,0,1280,720'</code>
 +
 +
Dispaly real-time video to HDMI output,preview window is 1280*720, last 20 seconds.
 +
 +
<code>./veye_raspipreview -t -1</code>
 +
 +
If t is -1, Show continuous Real-time display to HDMI output,full screen.
 +
 +
*veye_raspivid
 +
 +
<code>./veye_raspivid -t 5000 -o ~/test.h264</code>
 +
 +
Implement H.264 format encoding and record for 5 seconds,Record the stream data to file ~/test.h264.
 +
 +
At the same time,Dispaly real-time video to HDMI output.(use ''-n'' if you do not want preview)
 +
 +
*veye_raspivid  (direct tcp stream with '''netcat,gstreamer''' etc..)
 +
 +
'''''RPI side'''''
 +
 +
<code>./veye_raspivid -b 4000000 -t 0 -o - | nc -l -p 5000</code>
 +
 +
H.264 encoding on bitrate 4Mbps,forever,listen on TCP port 5000.
 +
 +
'''''PC side,using gstreamer(Powershell recommended)'''''
 +
 +
<code>./gst-launch-1.0 -v tcpclientsrc host=x.x.x.x port=5000 ! decodebin ! autovideosink</code>
 +
 +
x.x.x.x is RPI IP address
 +
 +
'''''gstreamer''''' windows version [https://gstreamer.freedesktop.org/documentation/installing/on-windows.html?gi-language=c download].
 +
 +
'''''PC side, using mplayer'''''
 +
 +
<code>./mplayer -x 1280 -y 720 -geometry 0:0 -fps 200 -demuxer h264es -noborder ffmpeg://tcp://x.x.x.x:5000</code>
 +
 +
x.x.x.x is RPI IP address
 +
 +
mplayer for windows [http://mplayerwin.sourceforge.net/downloads.html download]
 +
 +
*veye_raspividyuv
 +
 +
<code>./veye_raspividyuv -t 200 -o /dev/shm/test.yuv</code>
 +
 +
Record UYVY data to file /dev/shm/  directory(which is in DDR), time is 200ms.
 +
 +
*veye_raspiraw
 +
 +
<code>./veye_raspiraw -md 2 -t 200 -o /dev/shm/out.%04d.yuv</code>
 +
 +
Record one UYVY data to file /dev/shm/  directory(which is in DDR).
 +
 +
*veye_raspstillyuv
 +
 +
<code>./veye_raspistillyuv -o /dev/shm/test.yuv</code>
 +
 +
Capturing one image and save to /dev/shm directory(which is in DDR).1920*1080 YUV420 I420 format.
 +
 +
<code>./veye_raspistillyuv -tl 50 -t 1000 -o /dev/shm/test%d.yuv</code>
 +
 +
Capturing one image every 50 milliseconds and save to /dev/shm directory(which is in DDR).1920*1080 YUV420 I420 format.
 +
 +
*veye_raspistill
 +
 +
<code>./veye_raspistill -o ~/test.jpg</code>
 +
 +
Capturing one image and save to home directory.1920*1080 JPG  format.
 +
 +
<code>./veye_raspistill -e bmp -tl 50 -t 1000  -o /dev/shm/test%d.bmp</code>
 +
 +
Capturing one image every 50 milliseconds and save to /dev/shm directory(which is in DDR).1920*1080 BMP format.
 +
 +
<code>./veye_raspistill -k -o ~/test%d.jpg -t 0</code>
 +
 +
Display video to HDMI,capture jpg image using keyboard,Enter to capture,X Enter to quit.
 +
 +
veye_raspistill support preview,-n will not preview。
 +
====D-SDK Toolkits Manual====
 +
It contains three parts: C language SDK(libdmipicam.so),C language sample,Python language sample.
 +
 +
=====Install support package=====
 +
<code>sudo apt-get update && sudo apt-get install libopencv-dev</code>
 +
 +
<code>sudo apt-get install python-opencv</code>
 +
 +
<code>sudo apt-get install libzbar-dev</code>
 +
=====D-SDK=====
 +
 +
*interface:
 +
 +
opensource,D_mipicam.h
 +
 +
*compile:
 +
 +
<code>./buildme</code>
 +
 +
*install:
 +
 +
<code>sudo install -m 644 ./libdmipicam.so /usr/lib/</code>
 +
=====C sample=====
 +
 +
*preview
 +
 +
Dispaly real-time video to HDMI output
 +
 +
*preview-dualcam
 +
 +
Dispaly real-time video to HDMI output for dual cameras(RPI CM)
 +
 +
*video
 +
 +
H.264 format encoding and record to file.
 +
 +
*capture
 +
 +
Capture one jpeg image.
 +
 +
*video2stdout
 +
 +
H.264 format encoding and send to stdout,which could be used by pipe. It's like <code>veye_raspivid -o -</code>.
 +
 +
<code>./video2stdout | nc -l -p 5000</code>
 +
 +
*capture_yuv
 +
 +
Capture one yuv image.
 +
 +
*capture-dualcam
 +
 +
Capture jpeg images for dual cameras.
 +
 +
*yuv_stream
 +
 +
Shows how to get yuv stream.
 +
 +
*capture2opencv
 +
 +
Shows how to get yuv stream,transfer to opencv format and display it.
 +
 +
*qrcode_detection
 +
 +
Shows how to get yuv stream,transfer to opencv format and display it and detect QR code.
 +
 +
=====Python sample=====
 +
 +
*preview.py
 +
 +
Dispaly real-time video to HDMI output
 +
 +
*capture.py
 +
 +
Capture one jpeg image.
 +
 +
*capture_yuv.py
 +
 +
capture_yuv
 +
 +
*video.py
 +
 +
H.264 format encoding and record to file.
 +
 +
*capture2opencv.py
 +
 +
Shows how to get yuv stream,transfer to opencv format and display it.
 
===Video Control Toolkits Manual===
 
===Video Control Toolkits Manual===
 +
On Raspberry Pi, I2C-0 is used by GPU. We use I2C-1 as control bus for VEYE Camera Module. We provide a Shell Script — camera_i2c_config— to config pin usage.
    +
Video Control Toolkits Manual : [[VEYE-MIPI-290/327 i2c/|VEYE-MIPI-290/327 i2c]]
 +
<br />
 
===RPI Computer Module and RPI Zero Additional Info===
 
===RPI Computer Module and RPI Zero Additional Info===
 +
 +
====Overview====
 +
RPI CM and Zero have a different MIPI CSI-2 port with standard RPI. And CM has can support dual cameras. Here I use a VEYE-MIPI-290/327 and a RPI CM3 as an example.
 +
 +
PS: I use a Computer Module IO Board Plus designed by [http://www.waveshare.net/ WAVESHARE ELECTRONICS]. The official CMIO Board is similar.
 +
 +
====Hardware Setup====
 +
 +
=====Connecting Video Stream Port=====
 +
 +
*Connect the VEYE Camera Module the CSI-2 port using FFC Cable('''type A''').
 +
*Connect Dupont Line as shown below. VEYE-MIPI-290/327 need an addtional power.
 +
*CM3 can support dual cameras.
 +
 +
=====Connecting I2C to CMIO=====
 +
 +
*CAM1:
 +
 +
Attach CD1_SDA to GPIO2 .
 +
 +
Attach CD1_SCL to GPIO3 .
 +
 +
*CAM0:
 +
 +
Attach CD0_SDA to GPIO44 .
 +
 +
Attach  CD0_SCL  to GPIO45 .
 +
 +
For RPI official CMIO board, please refer to [https://www.raspberrypi.org/documentation/hardware/computemodule/cmio-camera.md Link].
 +
 +
For WAVESHARE CMIO board, as shown below.
 +
[[File:Adpter with VEYE-MIPI-290-327 front.jpg|center|thumb|Adpter with VEYE-MIPI-290-327 front|alt=|600x600px]]
 +
[[File:Adpter with VEYE-MIPI-290-327 back.jpg|center|thumb|Adpter with VEYE-MIPI-290-327 back|alt=|600x600px]]
 +
<br />
 +
[[File:Veye-computer module.jpg|center|thumb|600x600px|RPI CM2 to dual VEYE modules]]
 +
 +
 +
[[File:Veye computermodule Wiring scheme00.jpg|center|thumb|600x600px|RPI CM2 to dual VEYE modules(Part1)]]
 +
[[File:Veye computer moduleWiring scheme01.jpg|center|thumb|600x600px|RPI CM2 to dual VEYE modules(Part2)]]
 +
<br />
 +
 +
====System Setup and Configuration====
 +
For RPI official CMIO board, please refer to [https://www.raspberrypi.org/documentation/hardware/computemodule/cm-emmc-flashing.md Link].
 +
 +
For WAVESHARE CMIO board, please refer to [http://www.waveshare.net/w/upload/4/46/Compute_Module_IO_Board_PLUS_User_Manual.pdf Link],Page 7.
 +
====Video Stream Toolkits====
 +
All command support  [-cs] option.
 +
 +
option -cs 0 to control CAM0, -cs 1 to control CAM1. For example:
 +
 +
*veye_raspipreview
 +
 +
<code>./veye_raspipreview -cs 0 -t 20000</code>
 +
 +
Dispaly real-time video to HDMI output,from CAM0, lasts 20 seconds.
 +
 +
*veye_raspivid
 +
 +
<code>./veye_raspivid -cs 1 -t 5000 -o ~/test.h264</code>
 +
 +
Implement H.264 format encoding and record for 5 seconds from camera 1,Record the stream data to file ~/test.h264.<br />
 +
====Video Control Toolkits====
 +
Downloading dt-blob.bin file from link,and upload it to /root/,reboot RPI.
 +
 +
CM3 use I2C-1 to control 2 cameras,It is time-sharing multiplexing.
 +
 +
<code>./camera_i2c_config [cameranum]</code>
 +
{| class="wikitable"
 +
!cameranum
 +
!description
 +
|-
 +
|0
 +
|CAM0
 +
|-
 +
|1
 +
|CAM1
 +
|}<code>./veye_mipi_i2c.sh -b 1</code>
 +
 +
<br />Other options see : [[VEYE-MIPI-290/327 i2c/zh|VEYE-MIPI-290/327 i2c]]
 +
===FFC Cable Remarks===
 +
 +
*For Standard RPI,use FFC cable TypeB.
 +
 +
[[File:Veye Base Adapter FFC.jpg|center|thumb|600x600px|FFC Cable TypeB.]]
 +
 +
*For RPI CM3 ,use FFC cable TypeA.
 +
 +
[[File:Veye Computer Module 3 IO BRD V3 FFC同面.jpg|center|thumb|600x600px|FFC Cable TypeA.]]
          
<br />
 
<br />

Navigation menu