Line 1: |
Line 1: |
| [[VEYE MIPI 290/327 for Raspberry Pi/zh|查看中文]] | | [[VEYE MIPI 290/327 for Raspberry Pi/zh|查看中文]] |
| | | |
− | '''How to Use Veye Mipi Camera with Raspberry Pi''' | + | '''[[VEYE-MIPI-290/327 for Raspberry Pi|<big><big><big><big>How to use VEYE-MIPI-290/327 camera module on Raspberry Pi</big></big></big></big>]]''' |
| | | |
| ===Introduction=== | | ===Introduction=== |
Line 20: |
Line 20: |
| *Startup RaspberryPi. | | *Startup RaspberryPi. |
| | | |
− | [[File:Mini adpter with VEYE-MIPI-290-327 front.jpg|center|thumb|Mini adpter with VEYE-MIPI-290-327 front]] | + | [[File:Mini adpter with VEYE-MIPI-290-327 front.jpg|center|thumb|Mini adpter with VEYE-MIPI-290-327 front|alt=|600x600px]] |
− | [[File:Mini adpter with VEYE-MIPI-290-327 back.jpg|center|thumb|Mini adpter with VEYE-MIPI-290-327 back]] | + | [[File:Mini adpter with VEYE-MIPI-290-327 back.jpg|center|thumb|Mini adpter with VEYE-MIPI-290-327 back|alt=|600x600px]] |
| + | |
| | | |
| | | |
Line 48: |
Line 49: |
| ====Toolkits Overview==== | | ====Toolkits Overview==== |
| [[File:Rpi github overview.jpg|alt=|center|thumb|600x600px|Software Tookits on github]] | | [[File:Rpi github overview.jpg|alt=|center|thumb|600x600px|Software Tookits on github]] |
− | Software toolkits contains threeparts. ''veye_raspcam'' is raspcam alike Video Stream Toolkits, D_mipi_rpi is D-SDK Video Stream Toolkits, ''i2c_cmd'' is Video Control Toolkits. | + | Software toolkits contains three parts. ''veye_raspcam'' is raspcam alike Video Stream Toolkits, D_mipi_rpi is D-SDK Video Stream Toolkits, ''i2c_cmd'' is Video Control Toolkits. |
| | | |
| *Video Stream Tookkits provides real-time display, capture, video recording, etc. | | *Video Stream Tookkits provides real-time display, capture, video recording, etc. |
Line 159: |
Line 160: |
| *compile: | | *compile: |
| | | |
− | <code>./build</code> | + | <code>./buildme</code> |
| | | |
| *install: | | *install: |
Line 266: |
Line 267: |
| | | |
| For WAVESHARE CMIO board, as shown below. | | For WAVESHARE CMIO board, as shown below. |
− | [[File:Adpter with VEYE-MIPI-290-327 front.jpg|center|thumb|Adpter with VEYE-MIPI-290-327 front]] | + | [[File:Adpter with VEYE-MIPI-290-327 front.jpg|center|thumb|Adpter with VEYE-MIPI-290-327 front|alt=|600x600px]] |
− | [[File:Adpter with VEYE-MIPI-290-327 back.jpg|center|thumb|Adpter with VEYE-MIPI-290-327 back]] | + | [[File:Adpter with VEYE-MIPI-290-327 back.jpg|center|thumb|Adpter with VEYE-MIPI-290-327 back|alt=|600x600px]] |
| <br /> | | <br /> |
| [[File:Veye-computer module.jpg|center|thumb|600x600px|RPI CM2 to dual VEYE modules]] | | [[File:Veye-computer module.jpg|center|thumb|600x600px|RPI CM2 to dual VEYE modules]] |
Line 298: |
Line 299: |
| ====Video Control Toolkits==== | | ====Video Control Toolkits==== |
| Downloading dt-blob.bin file from link,and upload it to /root/,reboot RPI. | | Downloading dt-blob.bin file from link,and upload it to /root/,reboot RPI. |
| + | |
| + | CM3 use I2C-1 to control 2 cameras,It is time-sharing multiplexing. |
| | | |
| <code>./camera_i2c_config [cameranum]</code> | | <code>./camera_i2c_config [cameranum]</code> |
Line 309: |
Line 312: |
| |1 | | |1 |
| |CAM1 | | |CAM1 |
− | |}<code>./veye_mipi_i2c.sh -b [i2c bus num]</code> | + | |}<code>./veye_mipi_i2c.sh -b 1</code> |
− | {| class="wikitable"
| + | |
− | !i2c bus num
| + | <br />Other options see : [[VEYE-MIPI-290/327 i2c/zh|VEYE-MIPI-290/327 i2c]] |
− | !description
| |
− | |-
| |
− | |0
| |
− | |CAM0
| |
− | |-
| |
− | |1
| |
− | |CAM1
| |
− | |}<br />Other options see : [[VEYE-MIPI-290/327 i2c/zh|VEYE-MIPI-290/327 i2c]]
| |
| ===FFC Cable Remarks=== | | ===FFC Cable Remarks=== |
| | | |