2,021
edits
Changes
Jump to navigation
Jump to search
Line 38:
Line 38: − + Line 54:
Line 54: + Line 201:
Line 202: − + Line 219:
Line 220: − + Line 486:
Line 487: + + + + + + + + + + + + + + + + + +
→sharppen
./veye_mipi_i2c.sh
./veye_mipi_i2c.sh
Usage: ./veye_mipi_i2c.sh [-r/w] [-f] function name -p1 param1 -p2 param2 -b bus
Usage: ./veye_mipi_i2c.sh [-r/w] [-f] function name -p1 param1 -p2 param2 -b bus -d i2caddr
options:
options:
-b [i2c bus num] i2c bus number
-b [i2c bus num] i2c bus number
-d [i2c addr] i2c device address
=== i2c bus number on different board ===
=== i2c bus number on different board ===
Please refer to the following article to determine which -b parameter you need to use.
Please refer to the following article to determine which -b parameter you need to use.
agc indicated max gain of AE mode.
agc indicated max gain of AE mode.
Agc stands for auto gain control. It is a part of auto exposure, in different light intensity, will try to adjust the gain of sensor to achieve the same image brightness.
Agc stands for auto gain control. It is a part of auto exposure, in different light intensity, will try to adjust the gain of sensor to achieve the same image brightness. 0xC by default.
{| class="wikitable"
{| class="wikitable"
!value
!value
{| class="wikitable"
{| class="wikitable"
!value
!value
!description
!minimum fps
|-
|-
|0x01
|0x01
|0x0
|0x0
| sharppen disable
| sharppen disable
|-
|0x1
| sharppen enable
|}default: 0x1
param2: sharppen strength, range [0x0-0xA]
=====wdrsharppen=====
<code>./veye_mipi_i2c.sh -r -f wdrsharppen</code>
<code>./veye_mipi_i2c.sh -w -f wdrsharppen -p1 [val1] -p2 [value]</code>
sharppeness setting on DOL WDR mode.
{| class="wikitable"
! param1 value
!description
|-
|0x0
|sharppen disable
|-
|-
|0x1
|0x1