Line 372: |
Line 372: |
| Caputre mode: output the next frame each '''capture''' cmd. | | Caputre mode: output the next frame each '''capture''' cmd. |
| | | |
− | ===== notf ===== | + | =====notf===== |
| Requirements:hdver >= 0x3, effective in Stream mode | | Requirements:hdver >= 0x3, effective in Stream mode |
| | | |
Line 389: |
Line 389: |
| '''ntof''' range is [0-0xFF], default 0. | | '''ntof''' range is [0-0xFF], default 0. |
| | | |
− | ===== capture ===== | + | =====capture===== |
| Requirements:hdver >= 0x3, effective in Capture mode | | Requirements:hdver >= 0x3, effective in Capture mode |
| | | |
| <code>./veye_mipi_i2c.sh -w -f capture</code> | | <code>./veye_mipi_i2c.sh -w -f capture</code> |
| | | |
− | Output the next frame each cmd。This cmd does not interfere the sensor, it just output the next frame (the newest frame). | + | Output the next frame. This cmd does not interfere the sensor, it just output the next frame (the newest frame). |
| | | |
| So it is not trigger mode, there will be a delay[0,1/framerate] between the cmd and the frame exposure. | | So it is not trigger mode, there will be a delay[0,1/framerate] between the cmd and the frame exposure. |
Line 400: |
Line 400: |
| It is applicable to those that do not require a high level of real-time performance. | | It is applicable to those that do not require a high level of real-time performance. |
| | | |
− | ===== csienable ===== | + | =====csienable===== |
| Requirements:hdver >= 0x3 | | Requirements:hdver >= 0x3 |
| | | |