2,021
edits
Changes
Jump to navigation
Jump to search
Line 40:
Line 40: − + Line 55:
Line 55: + + Line 203:
Line 205: − 含义为增益上限+ Line 220:
Line 222: − + Line 493:
Line 495: + + + + + + + + + + + + + + + + + + + +
VEYE-MIPI-290/327 i2c/zh (view source)
Revision as of 15:29, 16 October 2023
, 15:29, 16 October 2023no edit summary
./veye_mipi_i2c.sh
./veye_mipi_i2c.sh
Usage: ./veye_mipi_i2c.sh [-r/w] [-f] function name -p1 param1 -p2 param2 -b bus
Usage: ./veye_mipi_i2c.sh [-r/w] [-f] function name -p1 param1 -p2 param2 -b bus -d i2caddr
options:
options:
-b [i2c bus num] i2c bus number
-b [i2c bus num] i2c bus number
-d [i2c addr] i2c device address
=== 不同板子上的i2c序号===
=== 不同板子上的i2c序号===
请参考下面的文章，确定你所需要使用的-b参数。
请参考下面的文章，确定你所需要使用的-b参数。
<code>./veye_mipi_i2c.sh -r -f agc
<code>./veye_mipi_i2c.sh -r -f agc
./veye_mipi_i2c.sh -w -f agc -p1 [value]</code>
./veye_mipi_i2c.sh -w -f agc -p1 [value]</code>
含义为增益上限，默认为0xC。
{| class="wikitable"
{| class="wikitable"
!value
!value
{| class="wikitable"
{| class="wikitable"
!value
!value
!description
!最小帧率
|-
|-
|0x01
|0x01
<code>./veye_mipi_i2c.sh -w -f sharppen -p1 [val1] -p2 [value]</code>
<code>./veye_mipi_i2c.sh -w -f sharppen -p1 [val1] -p2 [value]</code>
{| class="wikitable"
!param1 value
!description
|-
|0x0
|sharppen disable
|-
|0x1
|sharppen enable
|}
default: 0x1
param2: sharppen strength, range [0x0-0xA]
===== wdrsharppen =====
<code>./veye_mipi_i2c.sh -r -f wdrsharppen</code>
<code>./veye_mipi_i2c.sh -w -f wdrsharppen -p1 [val1] -p2 [value]</code>
sharppeness setting on DOL WDR mode
{| class="wikitable"
{| class="wikitable"
!param1 value
!param1 value