Difference between revisions of "VEYE-MIPI-IMX385 Data Sheet"

From wiki_veye
Jump to navigation Jump to search
Line 31: Line 31:
 
|-
 
|-
 
|Sensor
 
|Sensor
|SONY [https://www.sony-semicon.co.jp/products/common/pdf/IMX385LQR_Flyer.pdf IMX385LQR-C] STARVIS
+
|SONY IMX385LQR-C STARVIS
 
|-
 
|-
 
|Pixels
 
|Pixels

Revision as of 16:08, 4 August 2022

查看中文

VEYE-MIPI-IMX385 DATA SHEET

1 Introduction

VEYE-MIPI-IMX385 is a large Imaging size starlight video streaming module, using a compact design (38*38mm) to facilitate user integration, standard 15pin FPC user interface, easy access to embedded platforms such as raspberry pi and Nvidia.

The function of automatic power switch is added,5V and 3.3V power supply can be automatically switched to 5V power supply, or you can freely choose 5V or 3.3V independent power supply.

VEYE-MIPI-IMX385

2 Features

  • 1/2 inch 2 Mega sensor IMX385LQR-C by SONY
  • MIPI output: CSI-2
  • Uncompressed UYVY format, YUV422-8bit
  • IR-CUT circuit
  • Stream mode and Capture mode
  • Framerate control
  • BLC, DOL-WDR, 2D/3D noise reduction, Anti-fog
  • Brightness, Contrast, Sharpness, Saturation adjustable
  • Support 5V - 3.3V access at the same time, automatic switch 5V power supply
  • Also support 5V, 3.3V independent power supply
VEYE-MIPI-IMX385

3 Thechnical Detail

Technical Details
SENSOR
Sensor SONY IMX385LQR-C STARVIS
Pixels 2.07M pixels
Resolution 1920*1080
Image Size Diagonal 8.35 mm (Type 1/2)
Unit Cell Size 3.75um (H) * 3.75um(V)
Output Format RAW Bayer
Shutter Type Rolling Shutter
SNR1s Value 0.13lx
ISP
Frame Rate 1080p@25 / 1080p@30fps
Exposure Auto or Manual
White Balance Auto or Manual
Shutter 1/25(1/30)s to 1/50,000s
Slow Shutter Support
Denoising 2D/3D noise reduction
Image Setting Brightness, Contrast, Sharpness, Saturation,Flip, Mirror
Image Enhancement BLC, DOL-WDR, Defog
Day/Night Switch Manual or IR-CUT filter with external trigger
Lens & IR-CUT
Lens YT1.0-5.1-1/1.8-8M
Lens Mount
Mounting Hole 2 screw holes with diameter of 2.2mm,21.6mm Center-to-Center Spacing
Interface
Connector 15Pin 1.0mm pitch FPC, upper contact
Communication Interface IIC, 3.3VDC
Video Data Interface MIPI:2 Data Lanes, CSI-2 YUV422-8bit Data Type, Bandwidth 1.188Gbps

MIPI CSI-2 DC Specifications

IR-CUT Control IR-CUT motor control, 3.3VDC
Day/Night External Trigger 3.3VDC to 12VDC compatibility
General
Operating Conditions

(Bare PCB)

Performance guarantee temperature:-10℃~60℃, Humidity 95% or less, non-condensing

Operating guarantee temperature:-30℃~85℃, Humidity 95% or less, non-condensing

Power Supply 5VDC
Power Consumption Usually: 1.3W

IR_CUT action switching moment: 1.7W

Dimension 38mm*38mm*11mm(not include lens and lens mount)

4 Spectral Sensitivity Characteristics

Sensor Spectral Sensitivity
IMX385LQR-C
IMX385LQR-C Spectral Sensitivity

5 Connector Pinlist

VEYE-MIPI-IMX385
VEYE-MIPI-IMX385
J3:CSI-2 Interface
Pin NO. NAME Remarks
1 GND
2 MIPI_L0_N
3 MIPI_L0_P
4 GND
5 MIPI_L1_N
6 MIPI_L1_P
7 GND
8 MIPI_CK_N
9 MIPI_CK_P
10 GND
11 RST Active Low,reset camera module
12 NC
13 SCL 3.3V level
14 SDA 3.3V level
15 VCC3V3 PWR IN
J2 : Day/Night External Trigger
Pin NO. NAME Remarks
1 Day&Night Signal In INPUT,Active Low(Image to MONO),3.3VDC to 12VDC compatibility
2 GND
3 NC
J4 : IRCUT Control Functional specifications
MODE Pin NO. PIN NAME Signal polarity Image type Filter position
Mode 1 1 IRCUT1 - color Infrared cutoff
2 IRCUT2 +
Mode 2 1 IRCUT1 + mono Full wavelength pass
2 IRCUT2 -
J6:5VDC INPUT
Pin NO. NAME Remarks
1 5VDC
2 GND
J7:Auxiliary IIC
Pin NO. NAME Remarks
1 AUX_SCL
2 GND
3 AUX_SDA

6 Board Dimension

CAD drawing unit : mm

下载dwg图纸

7 PCBA 3D STP File

download 3D STP file