VEYE CS Camera on Firfly Boards

From wiki_veye
Jump to navigation Jump to search

How to use VEYE and CS series cameras on Firefly's RK35XX board (Ubuntu)

1 Overview

VEYE series and CS series cameras are the video streaming mode MIPI cameras we designed. This article takes Firefly's ROC-RK3566-PC board as an example to introduce how to connect VEYE and CS series cameras to RK3566/RK3568/RK3588 system.

1.1 Camera Module List

Series Model Status
VEYE Series VEYE-MIPI-IMX327S Done
VEYE Series VEYE-MIPI-IMX462 Done
VEYE Series VEYE-MIPI-IMX385 Done

2 Hardware Setup

VEYE series and CS series cameras are provided with Raspberry Pi compatible 15Pin FFC connector. An ADP-Tfirefly adapter board is required to adapt to the ROC-RK3566-PC board.

2.1 Connection of camera and ADP-Tfirefly

The two are connected using 1.0 mm pitch*15P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside.

2.2 Connection of ADP-Tfirefly and Firefly Board

The two are connected using 0.5 mm pitch*30P FFC cable with same direction. The cable must be inserted with the silver contacts facing inside.

2.3 Overall connection

TODO

3 Introduction to github repositories


4 Upgrade Firefly Ubuntu system


5 Check system status

6 Samples

6.1 v4l2-ctl

6.2 yavta

6.3 gstreamer

6.4 Import to OpenCV

7 i2c script for parameter configuration

8 Compile drivers and dtb from source code

9 References

  • ROC-RK3566-PC Manual

https://wiki.t-firefly.com/en/ROC-RK3566-PC/

  • Firefly Linux User Guide

https://wiki.t-firefly.com/en/Firefly-Linux-Guide/index.html

10 Document History

  • 2022-10-22

Release 1st version.