2,021
edits
Changes
Jump to navigation
Jump to search
Line 40:
Line 40: + + + + + + + + +
VEYE CS Camera on Forlinx i.MX8 board (view source)
Revision as of 09:24, 20 July 2023
, 09:24, 20 July 2023no edit summary
The camera and ADP-Forlinx are connected using 1.0 mm pitch*15P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside.
The camera and ADP-Forlinx are connected using 1.0 mm pitch*15P FFC cable with opposite direction. The cable must be inserted with the silver contacts facing outside.
[[File:VEYE camera Connect to OKMX8MPQ-C.jpg|center|thumb|800x800px|VEYE camera Connect to OKMX8MPQ-C]]
[[File:VEYE camera Connect to OKMX8MPQ-C.jpg|center|thumb|800x800px|VEYE camera Connect to OKMX8MPQ-C]]
=== Upgrade OKMX8MPQ-C system ===
==== Overview ====
This section describes how to update the MYD-JX8MX system to support our camera module. To support our camera module, we need to update two parts of the system, '''Image''' and '''DTB'''.
In the Image, we added the camera driver, while the DTB indicates the camera model used. In general, you only need to use the Image and DTB, that we have prebuilt, and you don't need to build from source when it is not necessary.
This chapter describes the released files, which were compiled based on the image of OKMX8MP-C_Linux5.4.70+Qt5.15.0 version.
<br />
<br />