1,602
edits
Changes
Jump to navigation
Jump to search
Line 19:
Line 19: − + Line 43:
Line 43: − + − + Line 95:
Line 95: − + − + − − Pay attention to the log information, it can be installed correctly normally. + + + + + + + + Line 175:
Line 181: − +
VEYE CS Camera on google Coral board (view source)
Revision as of 09:14, 2 March 2022
, 09:14, 2 March 2022→install v4l2-utils
|VEYE series
|VEYE series
|VEYE-MIPI-IMX385
|VEYE-MIPI-IMX385
|Processing
|Done
|ADP-TWG
|ADP-TWG
|-
|-
=== Upgrade Mendel Linux system ===
=== Upgrade Mendel Linux system ===
==== overview ====
==== Overview ====
This section describes how to update the MYD-JX8MX system to support our camera module. To support our camera module, we need to update two parts of the system, '''Image''' and '''dtb'''.
This section describes how to update the Coral dev board system to support our camera module. To support our camera module, we need to update two parts of the system, '''Image''' and '''dtb'''.
In the Image, we added the camera driver, while the dtb indicates the camera model used. In general, you only need to use the Image and dtb, that we have prebuilt(in deb format), and you don't need to build from source when it is not necessary.
In the Image, we added the camera driver, while the dtb indicates the camera model used. In general, you only need to use the Image and dtb, that we have prebuilt(in deb format), and you don't need to build from source when it is not necessary.
<code>deft-kid (192.168.0.122)</code>
<code>deft-kid (192.168.0.122)</code>
* install linux image dtb
* push deb file to coral board
<code>cd google_coral_i.mx/linux-image-deb/</code>
<code>cd google_coral_i.mx/linux-image-deb/</code>
<code>mdt install ./linux-image-4.14.98-imx_12-2_arm64.deb</code>
<code>mdt push linux-image-4.14.98-imx_12-2_arm64.deb</code>
* Log in Coral board via mdt
* Log in Coral board via mdt
<code>mdt shell</code>
<code>mdt shell</code>
* Install deb file
<code>sudo dpkg -i linux-image-4.14.98-imx_12-2_arm64.deb</code>
Pay attention to the log information, it can be installed correctly normally.
* Overwrite the dtb file
* Overwrite the dtb file
In coral board shell,
In coral board shell,
<code>cd /boot/</code>
<code>sudo cp fsl-imx8mq-phanbell-<camera_name>.dtb fsl-imx8mq-phanbell.dtb</code>
<code>sudo cp fsl-imx8mq-phanbell-<camera_name>.dtb fsl-imx8mq-phanbell.dtb</code>
<code>v4l2-ctl --list-formats-ext -d /dev/video0</code>
<code>v4l2-ctl --list-formats-ext -d /dev/video0</code>
==== Video Stream test ====
==== Gstreamer usage examples ====
===== Install gstreamer tools =====
===== Install gstreamer tools =====