Line 1: |
Line 1: |
| [[VEYE-MIPI-290/327/zh|查看中文]] | | [[VEYE-MIPI-290/327/zh|查看中文]] |
| | | |
− | === Introduction === | + | ===Introduction=== |
| + | Veye-mipi-290/327 is a camera module designed by tianjin zhongan yijia technology co., LTD., with excellent low illumination and wide dynamic.This module only has 38*38*8mm, which is convenient for integration and can be connected to various embedded motherboards with adapter board.Suitable for machine vision, intelligent analysis, industrial control, face recognition, ADAS and other occasions. |
| | | |
− | === Features === | + | ===Features=== |
| + | l 1/2.8 inch 2 Mega STARVIS sensor IMX290/IMX327 by SONY |
| | | |
− | === Thechnical Detail ===
| + | l LVDS output: 7:1 interface (VEYE-LVDS-290/VEYE-LVDS-327 support) |
| | | |
− | === Diagram, Layout and Dimension ===
| + | l MIPI output: CSI-2 (VEYE-MIPI-290/VEYE-MIPI-327 support) |
| | | |
− | === Get Started ===
| + | l Uncompressed UYVY format, YUV422-8bit |
| | | |
− | === Resources ===
| + | l Standard lens mount |
| | | |
− | === Update Log === | + | l IR-CUT circuit |
| + | |
| + | l BLC, DOL-WDR, 2D/3D noise reduction, Anti-fog |
| + | |
| + | l Brightness, Contrast, Sharpness, Saturation adjustable |
| + | |
| + | l Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, TK1 |
| + | |
| + | ===Thechnical Detail=== |
| + | {| class="wikitable" |
| + | | colspan="2" |'''Technical Details''' |
| + | |- |
| + | | colspan="2" |SENSOR |
| + | |- |
| + | |Sensor |
| + | |SONY IMX290LQR-C/IMX327LQR-C STARVIS |
| + | |- |
| + | |Pixels |
| + | |2.13M pixels |
| + | |- |
| + | |Resolution |
| + | |1920*1080 |
| + | |- |
| + | |Image Size |
| + | |Diagonal 6.46 mm (Type 1/2.8) |
| + | |- |
| + | |Unit Cell Size |
| + | |2.9um (H)*2.9um(V) |
| + | |- |
| + | | colspan="2" |ISP |
| + | |- |
| + | |Frame Rate |
| + | |1080p@25 / 1080p@30fps |
| + | |- |
| + | |Exposure |
| + | |Auto or Manual |
| + | |- |
| + | |White Balance |
| + | |Auto or Manual |
| + | |- |
| + | |Shutter |
| + | |1/25(1/30)s to 1/50,000s |
| + | |- |
| + | |Slow Shutter |
| + | |Support |
| + | |- |
| + | |Denoising |
| + | |2D/3D noise reduction |
| + | |- |
| + | | |
| + | Image Setting |
| + | | |
| + | Brightness, Contrast, Sharpness, Saturation, |
| + | |
| + | Flip, Mirror |
| + | |- |
| + | |Image Enhancement |
| + | |BLC, DOL-WDR, Defog |
| + | |- |
| + | |Day/Night Switch |
| + | |Manual or IR-CUT filter with external trigger |
| + | |- |
| + | | colspan="2" |Lens & IR-CUT |
| + | |- |
| + | |Lens |
| + | |Support M12*0.5 or M16*0.5 depend on lens mount |
| + | |- |
| + | |Lens Mount with IR-CUT |
| + | |MTV12 or MTV16 |
| + | |- |
| + | |Mounting Hole |
| + | |· 2 screw holes with diameter of 2.2mm, |
| + | 20mm Center-to-Center Spacing |
| + | |- |
| + | | colspan="2" |Interface |
| + | |- |
| + | |PCB Connector |
| + | |BTB connector:BTB050040-F1D |
| + | |- |
| + | |Communication Interface |
| + | |IIC, 3.3VDC |
| + | |- |
| + | |Video Data Interface |
| + | |LVDS:3 Data Lanes, Bandwidth 1.5582Gbps or |
| + | |
| + | MIPI:2 Data Lanes, CSI2 YUV422-8bit Data Type, Bandwidth 1.188Gbps |
| + | |- |
| + | |IR-CUT Control |
| + | |IR-CUT motor control, 3.3VDC |
| + | |- |
| + | |Day/Night External Trigger |
| + | |3.3VDC to 12VDC compatibility |
| + | |- |
| + | | colspan="2" |General |
| + | |- |
| + | |Operating Conditions |
| + | |<nowiki>-10℃-50℃, Humidity 95% or less, non-condensing</nowiki> |
| + | |- |
| + | |Power Supply |
| + | |3.3VDC |
| + | |- |
| + | |Power Consumption |
| + | |3.3VDC,1.2W |
| + | |- |
| + | |Dimension |
| + | |38mm*38mm*8mm(not include lens and lens mount) |
| + | |} |
| + | |
| + | ===Diagram, Layout and Dimension=== |
| + | <br /> |
| + | ===Get Started=== |
| + | |
| + | ===Resources=== |
| + | |
| + | ===Update Log=== |