340
edits
Changes
Jump to navigation
Jump to search
no edit summary
Line 6:
Line 6:
Download dt-blob.bin from [here]，(<nowiki>https://www.raspberrypi.org/documentation/hardware/computemodule/dt-blob-dualcam.bin</nowiki> “here”) rename it to dt-blob.bin and place it in /boot/，then+===camera_i2c_config USAGE===+本脚本实现I2C总线管脚复用的配置。<br />
−
−
你需要先运行camera_i2c_config配置管脚，然后执行veye_mipi_i2c.sh。
你需要先运行camera_i2c_config配置管脚，然后执行veye_mipi_i2c.sh。
−=== '''软件配置''' ===
+===camera_i2c_config USAGE===
−连接树莓派Computer Module情况下，选项-b [i2c bus num]选择摄像机模组
<code>./camera_i2c_config [cameranum]</code>
<code>./camera_i2c_config [cameranum]</code>
+
+连接标准树莓派情况下，直接运行
<code>./camera_i2c_config</code>
<code>./camera_i2c_config</code>
−=== veye_mipi_i2c.sh USAGE ===
−===veye_mipi_i2c.sh USAGE===
./veye_mipi_i2c.sh
./veye_mipi_i2c.sh