1,602
edits
Changes
Jump to navigation
Jump to search
MV Series MIPI Camera Register Map (view source)
Revision as of 09:07, 7 March 2022
, 09:07, 7 March 2022→Image Acquisition
Line 148:
Line 148:
+
+
+
+
+
+
+
+
|0x0400
|0x0400
|Image Acquisition
|Image Acquisition
−|
+|Start/Stop acquisition
+There is no image output after the camera is powered on, which means it is in the standby state.
+After writing 1 to this register, it enters the running state and starts outputting images or waiting for the trigger signal.
|bool
|bool
|WO
|WO
Line 156:
Line 160:
|0x0404
|0x0404
|Trigger Mode
|Trigger Mode
−|
+|0：Video streaming mode
+1：Normal trigger mode.
+2：High-speed continuous trigger mode.
+See product manual for details.
|enum
|enum
|RW
|RW
Line 164:
Line 174:
|0x0408
|0x0408
|Trigger Source
|Trigger Source
−|
+|0: Software trigger mode.
+1: Hardware trigger mode.
|enum
|enum
|RW
|RW
Line 172:
Line 184:
|0x040C
|0x040C
|Trigger Number
|Trigger Number
−|
+|The number of image frames output by one trigger signal in trigger mode. Range：[1.255]
|uint
|uint
|RW
|RW
Line 180:
Line 192:
|0x0410
|0x0410
|Trigger Interval
|Trigger Interval
−|
+|Trigger interval in normal trigger mode, in microseconds. Range:[0.0xFFFFFF]
|uint
|uint
|RW
|RW
Line 188:
Line 200:
|0x0414
|0x0414
|Trigger Software
|Trigger Software
−|
+|Software trigger command, write 1 for one trigger.
|bool
|bool
|WO
|WO
Line 196:
Line 208:
|0x0418
|0x0418
|Trigger Count
|Trigger Count
−|
+|Trigger count statistics.
+The high 16 bits indicate the number of trigger loss, and the low 16 bits indicate the total number of triggers.
+Write 1 to clear the count.
|uint
|uint
|RW
|RW
Line 204:
Line 220:
|0x041C
|0x041C
|I2C ADDR
|I2C ADDR
−|
+|I2c address. Range[0x03,0x77].
|uint
|uint
|RW
|RW