1,602
edits
Changes
Jump to navigation
Jump to search
→Image Acquisition
Line 9:
Line 9:
This article focuses on the functional principles of the MV camera in detail. For hardware manuals, registers, configuration scripts, drivers for different embedded platforms and usage, please refer to the corresponding documents.
This article focuses on the functional principles of the MV camera in detail. For hardware manuals, registers, configuration scripts, drivers for different embedded platforms and usage, please refer to the corresponding documents.
===Image Acquisition===
===Image Acquisition===
+
+==== Start/Stop Acquisition ====
+You can send the start acquisition and stop acquisition commands to the camera at any time.
+
+Once the camera receives the start acquisition command, if working in video streaming mode, it will immediately start exposure and output images; if working in trigger mode, it will enter the state of waiting for the trigger signal. At the same time, the camera enters the '''''running state'''''.
+
+Once the camera receives the stop capture command, it will complete the currently transmitting frames to ensure frame integrity, and then stop outputting images and enter the '''''standby state'''''. Note that the triggering process will be interrupted if triggering multiple frames is set and not all image frames have been output yet.
<br />
<br />
===Image Feature===
===Image Feature===