Changes

Jump to navigation Jump to search

Mv mipi camera manual (view source)

Revision as of 15:17, 26 October 2022

798 bytes added ,  15:17, 26 October 2022
→‎Smartsens's Global shutter
Line 91: Line 91:  
The following figure shows an example of a trigger period  with Trigger Number set to 2：
 
The following figure shows an example of a trigger period  with Trigger Number set to 2：
 
[[File:Normal trigger mode (Global shutter).png|center|thumb|800x800px|Smartsens's  Normal trigger mode (Global shutter)]]
 
[[File:Normal trigger mode (Global shutter).png|center|thumb|800x800px|Smartsens's  Normal trigger mode (Global shutter)]]
−
<br />For RAW series modules, Exposure Delay is not supported and Trigger number only support 1.
+
<br />For RAW series modules, Exposure Delay and Trigger Dealy are not supported and Trigger number only support 1.
    
===== Sony's Global shutter =====
 
===== Sony's Global shutter =====
Line 151: Line 151:  
|MV-MIPI-IMX178M
 
|MV-MIPI-IMX178M
 
|Mono8，Mono10，Mono12
 
|Mono8，Mono10，Mono12
−
|sensor AD is 12bit-depth
+
|sensor's AD is 12bit-depth
 
|-
 
|-
 
|MV-MIPI-SC130M
 
|MV-MIPI-SC130M
 
|Mono8，Mono10
 
|Mono8，Mono10
−
|sensor AD is 10bit-depth
+
|sensor's AD is 10bit-depth
 +
|-
 +
|MV-MIPI-IMX296M
 +
|Mono8，Mono10
 +
|sensor's AD is 10bit-depth
 +
|-
 +
|MV-MIPI-IMX265M
 +
|Mono8，Mono10，Mono12
 +
|sensor's AD is 12bit-depth
 +
|-
 +
|MV-MIPI-IMX264M
 +
|Mono8，Mono10，Mono12
 +
|sensor's AD is 12bit-depth
 +
|-
 +
|RAW-MIPI-SC132M
 +
|Mono8，Mono10
 +
|sensor's AD is 10bit-depth
 
|}
 
|}
 
Related commands ：fmtcap, pixelformat.
 
Related commands ：fmtcap, pixelformat.
Line 202: Line 218:  
|223
 
|223
 
|
 
|
 +
|-
 +
|MV-MIPI-IMX296M
 +
|1456×1088
 +
|60.3
 +
|Max size
 +
|-
 +
|MV-MIPI-IMX265M
 +
|2064×1544
 +
|45.9
 +
|Max size
 +
|-
 +
|RAW-MIPI-SC132M
 +
|1080×1280
 +
|120
 +
|Max size
 
|}
 
|}
 
The actual frame rate can be less than the maximum frame rate and can be set to a decimal number.  
 
The actual frame rate can be less than the maximum frame rate and can be set to a decimal number.  
Line 229: Line 260:  
|MV-MIPI-SC130M
 
|MV-MIPI-SC130M
 
|64 x 64
 
|64 x 64
 +
|
 +
|-
 +
|MV-MIPI-IMX296M
 +
|80x4
 +
|
 +
|-
 +
|MV-MIPI-IMX265M
 +
|258x4
 +
|
 +
|-
 +
|RAW-MIPI-SC132M
 +
|64x64
 
|
 
|
 
|}
 
|}
Line 260: Line 303:  
[[File:Test pattern2 enlarged.png|link=http://wiki.veye.cc/index.php/File:Test%20pattern2%20enlarged.png|center|thumb|800x800px|Test pattern2 （enlarged）]]
 
[[File:Test pattern2 enlarged.png|link=http://wiki.veye.cc/index.php/File:Test%20pattern2%20enlarged.png|center|thumb|800x800px|Test pattern2 （enlarged）]]
   −
===== MV-MIPI-SC130M =====
+
===== MV-MIPI-SC130M RAW-MIPI-SC132M =====
   −
====== SC130 Mode 1: Grayscale gradient test pattern ======
+
====== Mode 1: Grayscale gradient test pattern ======
 
[[File:Test-pattern1 sc130m.png|center|thumb|800x800px]]
 
[[File:Test-pattern1 sc130m.png|center|thumb|800x800px]]
 
Related command: testimg.
 
Related command: testimg.
−
<br />
      
===ISP===
 
===ISP===
 +
In this section, only manual exposure and manual gain are supported by RAW series cameras, and no other functions are supported.
    
==== Exposure and Gain Control ====
 
==== Exposure and Gain Control ====
Line 318: Line 361:  
|-
 
|-
 
|MV-MIPI-SC130M
 
|MV-MIPI-SC130M
 +
|0-40dB
 +
|0.1dB
 +
|-
 +
|MV-MIPI-IMX296M
 +
|0-48dB
 +
|0.1dB
 +
|-
 +
|MV-MIPI-IMX265M
 +
|0-48dB
 +
|0.1dB
 +
|-
 +
|MV-MIPI-IMX264M
 +
|0-48dB
 +
|0.1dB
 +
|-
 +
|RAW-MIPI-SC132M
 
|0-40dB
 
|0-40dB
 
|0.1dB
 
|0.1dB
Retrieved from "http://wiki.veye.cc/index.php/Special:MobileDiff/6002"

Navigation menu