2,573
edits
Changes
Jump to navigation
Jump to search
MV Camera on Firfly Boards (view source)
Revision as of 16:34, 10 November 2023
, 16:34, 10 November 2023→Overview
Line 397:
Line 397:
*raw8
*raw8
−<code>v4l2-ctl -d /dev/video0 --set-fmt-video=width=$WIDTH,height=$HEIGHT,pixelformat=GREY --stream-mmap --stream-count=1 --stream-to=y8-$WIDTHx$HEIGHT.raw</code>
+<code>v4l2-ctl -d /dev/video0 --set-fmt-video=width=$WIDTH,height=$HEIGHT,pixelformat=GREY --stream-mmap --stream-count=1 --stream-to=y8-${WIDTH}x${HEIGHT}.raw</code>
*raw10
*raw10
−<code>v4l2-ctl -d /dev/video0 --set-fmt-video=width=$WIDTH,height=$HEIGHT,pixelformat='Y10 ' --stream-mmap --stream-count=1 --stream-to=y10-$WIDTHx$HEIGHT.raw</code>
+<code>v4l2-ctl -d /dev/video0 --set-fmt-video=width=$WIDTH,height=$HEIGHT,pixelformat='Y10 ' --stream-mmap --stream-count=1 --stream-to=y10-${WIDTH}x${HEIGHT}.raw</code>
*raw12
*raw12
−<code>v4l2-ctl -d /dev/video0 --set-fmt-video=$WIDTH,height=$HEIGHT,pixelformat='Y12 ' --stream-mmap --stream-count=1 --stream-to=y12-$WIDTHx$HEIGHT.raw</code>
+<code>v4l2-ctl -d /dev/video0 --set-fmt-video=$WIDTH,height=$HEIGHT,pixelformat='Y12 ' --stream-mmap --stream-count=1 --stream-to=y12-${WIDTH}x${HEIGHT}.raw</code>
Please refer to the description in the previous section for the image format.
Please refer to the description in the previous section for the image format.
Line 452:
Line 452:
====== Start acquisition ======
====== Start acquisition ======
−<code>v4l2-ctl -d /dev/video0 --set-fmt-video=width=$WIDTH,height=$HEIGHT,pixelformat=GREY --stream-mmap --stream-count=1 --stream-to=y8-$WIDTHx$HEIGHT.raw</code>
+<code>v4l2-ctl -d /dev/video0 --set-fmt-video=width=$WIDTH,height=$HEIGHT,pixelformat=GREY --stream-mmap --stream-count=1 --stream-to=y8-${WIDTH}x${HEIGHT}.raw</code>
======Perform soft trigger operation======
======Perform soft trigger operation======
Line 469:
Line 469:
====== Start acquisition ======
====== Start acquisition ======
−<code>v4l2-ctl -d /dev/video0 --set-fmt-video=width=$WIDTH,height=$HEIGHT,pixelformat=GREY --stream-mmap --stream-count=1 --stream-to=y8-$WIDTHx$HEIGHT.raw</code>
+<code>v4l2-ctl -d /dev/video0 --set-fmt-video=width=$WIDTH,height=$HEIGHT,pixelformat=GREY --stream-mmap --stream-count=1 --stream-to=y8-${WIDTH}x${HEIGHT}.raw</code>
====== Perform hardware trigger operation ======
====== Perform hardware trigger operation ======