3,110
edits
Changes
Jump to navigation
Jump to search
CS-MIPI-IMX307 STARVIS Module (view source)
Revision as of 14:50, 22 November 2019
, 14:50, 22 November 2019Created page with "查看中文 ===Introduction=== CS-MIPI-IMX307 is a high quality Sony STARVIS IMX307 image sensor custom designed add-on board for Raspbe..."
[[CS-MIPI-IMX307 STARVIS Module/zh|查看中文]]
===Introduction===
CS-MIPI-IMX307 is a high quality Sony STARVIS IMX307 image sensor custom designed add-on board for Raspberry PI.
It attaches to Pi by way of one of the small sockets on the board upper surface and uses the dedicated CSI interface, designed especially for interfacing to cameras.
[[File:CS-MIPI-IMX307 TOP.jpg|thumb|400x400px|CS-MIPI-IMX307 TOP]]
<br />
[[File:CS-MIPI-IMX307 BOT.jpg|thumb|400x400px|CS-MIPI-IMX307 BOT]]
===Features===
*1/2.8 inch 2 Mega STARVIS sensor IMX307 by SONY
*CSI-2 Interface
*Uncompressed UYVY format, YUV422-8bit
*Standard lens mount
*IR-CUT circuit
*BLC, DWDR, 2D/3D noise reduction, Anti-fog
*Brightness, Contrast, Sharpness, Saturation adjustable
*Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, JETSON NANO,TX2
<br />
=== Thechnical Detail ===
{| class="wikitable"
| colspan="2" |'''Technical Details'''
|-
| colspan="2" |'''SENSOR'''
|-
|Sensor
|SONY IMX307-C STARVIS
|-
|Pixels
|2.07M pixels
|-
|Resolution
|1920*1080
|-
|Image Size
|Diagonal 6.46 mm (Type 1/2.8)
|-
|Unit Cell Size
|2.9um (H)*2.9um(V)
|-
|[https://www.sony-semicon.co.jp/e/products/IS/security/technology.html SNR1 Value]
|0.24lx
|-
| colspan="2" |'''ISP'''
|-
|Frame Rate
|1080p@25fps / 30fps, 720p@60fps / 50fps
|-
|Exposure
|Auto or Manual
|-
|White Balance
|Auto or Manual
|-
|Shutter
|1/25(1/30)s to 1/50,000s
|-
|Slow Shutter
|Support
|-
|Denoising
|2D/3D noise reduction
|-
|Image Setting
|Brightness, Contrast, Sharpness, Saturation,Flip, Mirror
|-
|Image Enhancement
|BLC, DOL-WDR, Defog
|-
|Day/Night Switch
|Manual or IR-CUT filter with external trigger
|-
| colspan="2" |'''Lens & IR-CUT'''
|-
|Lens
|Support M12*0.5 or M16*0.5 depend on lens mount
|-
|Lens Mount with IR-CUT
|MTV12 or MTV16
|-
|Mounting Hole
|2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing
|-
| colspan="2" |Interface
|-
|PCB Connector
|BTB connector:BTB050040-F1D
|-
|Communication Interface
|IIC, 3.3VDC
|-
|Video Data Interface
|MIPI:2 Data Lanes, CSI2 YUV422-8bit Data Type, Bandwidth 1.188Gbps
|-
|IR-CUT Control
|IR-CUT motor control, 3.3VDC
|-
|Day/Night External Trigger
|3.3VDC to 12VDC compatibility
|-
| colspan="2" |General
|-
|Operating Conditions
| -10℃~50℃, Humidity 95% or less, non-condensing
|-
|Power Supply
|3.3VDC
|-
|Power Consumption
|3.3VDC,1.2W
|-
|Dimension
|38mm*38mm*8mm(not include lens and lens mount)
|}
===Introduction===
CS-MIPI-IMX307 is a high quality Sony STARVIS IMX307 image sensor custom designed add-on board for Raspberry PI.
It attaches to Pi by way of one of the small sockets on the board upper surface and uses the dedicated CSI interface, designed especially for interfacing to cameras.
[[File:CS-MIPI-IMX307 TOP.jpg|thumb|400x400px|CS-MIPI-IMX307 TOP]]
<br />
[[File:CS-MIPI-IMX307 BOT.jpg|thumb|400x400px|CS-MIPI-IMX307 BOT]]
===Features===
*1/2.8 inch 2 Mega STARVIS sensor IMX307 by SONY
*CSI-2 Interface
*Uncompressed UYVY format, YUV422-8bit
*Standard lens mount
*IR-CUT circuit
*BLC, DWDR, 2D/3D noise reduction, Anti-fog
*Brightness, Contrast, Sharpness, Saturation adjustable
*Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, JETSON NANO,TX2
<br />
=== Thechnical Detail ===
{| class="wikitable"
| colspan="2" |'''Technical Details'''
|-
| colspan="2" |'''SENSOR'''
|-
|Sensor
|SONY IMX307-C STARVIS
|-
|Pixels
|2.07M pixels
|-
|Resolution
|1920*1080
|-
|Image Size
|Diagonal 6.46 mm (Type 1/2.8)
|-
|Unit Cell Size
|2.9um (H)*2.9um(V)
|-
|[https://www.sony-semicon.co.jp/e/products/IS/security/technology.html SNR1 Value]
|0.24lx
|-
| colspan="2" |'''ISP'''
|-
|Frame Rate
|1080p@25fps / 30fps, 720p@60fps / 50fps
|-
|Exposure
|Auto or Manual
|-
|White Balance
|Auto or Manual
|-
|Shutter
|1/25(1/30)s to 1/50,000s
|-
|Slow Shutter
|Support
|-
|Denoising
|2D/3D noise reduction
|-
|Image Setting
|Brightness, Contrast, Sharpness, Saturation,Flip, Mirror
|-
|Image Enhancement
|BLC, DOL-WDR, Defog
|-
|Day/Night Switch
|Manual or IR-CUT filter with external trigger
|-
| colspan="2" |'''Lens & IR-CUT'''
|-
|Lens
|Support M12*0.5 or M16*0.5 depend on lens mount
|-
|Lens Mount with IR-CUT
|MTV12 or MTV16
|-
|Mounting Hole
|2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing
|-
| colspan="2" |Interface
|-
|PCB Connector
|BTB connector:BTB050040-F1D
|-
|Communication Interface
|IIC, 3.3VDC
|-
|Video Data Interface
|MIPI:2 Data Lanes, CSI2 YUV422-8bit Data Type, Bandwidth 1.188Gbps
|-
|IR-CUT Control
|IR-CUT motor control, 3.3VDC
|-
|Day/Night External Trigger
|3.3VDC to 12VDC compatibility
|-
| colspan="2" |General
|-
|Operating Conditions
| -10℃~50℃, Humidity 95% or less, non-condensing
|-
|Power Supply
|3.3VDC
|-
|Power Consumption
|3.3VDC,1.2W
|-
|Dimension
|38mm*38mm*8mm(not include lens and lens mount)
|}