Mv series camera appnotes 4 jetson - Revision history

Xumm: /* Power supply */

2026-05-09T05:51:40Z

Power supply

Xumm: /* Document History */

2026-04-21T07:39:46Z

Document History

Xumm: /* Camera Module List */

2026-04-21T07:37:28Z

Camera Module List

Bluewhale: /* Connection of MV series cameras and ADP-MV1 */

2026-04-08T06:39:21Z

Connection of MV series cameras and ADP-MV1

Bluewhale: /* Connet to Orin Nano or Orin NX */

2026-04-08T06:18:53Z

Connet to Orin Nano or Orin NX

Bluewhale at 06:12, 8 April 2026

2026-04-08T06:12:32Z

Bluewhale: /* Gstreamer Usage */

2026-01-30T06:06:15Z

Gstreamer Usage

Bluewhale at 02:28, 30 January 2026

2026-01-30T02:28:04Z

Xumm at 02:37, 13 December 2025

2025-12-13T02:37:22Z

Show changes

Xumm: /* Overview */

2025-08-14T06:11:13Z

Overview

@@ Line 373: / Line 373: @@
 The ADP-N4 requires power supply. It supports two types of power supply, any one of them will work.
-*5V DC is connected to J19-9, which can be powered directly from the Jetson motherboard using a DuPont cable.
+*5V DC is connected to J19-9, which can be powered directly from the Jetson motherboard using a DuPont cable. This method is suitable for setups with 1-2 cameras.
-*12V DC is connected to J11, which needs to be powered by an external adapter.
+*12V DC is connected to J11, which needs to be powered by an external adapter. We recommend this method if you are using a larger number of cameras.
 =====Connection with TX2 Devkit and AGX Series using ADP-N4=====
@@ Line 1,031: / Line 1,031: @@
 ===Document History===
-* 2026-04-21
+*2026-04-21
 Add support for Jetpack6.2.2.

@@ Line 1,030: / Line 1,030: @@
 ===References===
 ===Document History===
 *2025-07-02

@@ Line 109: / Line 109: @@
 *Jetpack6.2,L4T r36.4.3
 *Jetpack6.2.1,L4T r36.4.4
 =====How to check the current L4T version=====

@@ Line 352: / Line 352: @@
 =====Connection of MV series cameras  and ADP-MV1=====
-The two are connected using 0.5 mm pitch*30P FFC cable with Opposite-side contacts. The cable must be inserted with the silver contacts facing outside.
+The two are connected using 0.5 mm pitch*30P FFC cable with Opposite-side contacts. The cable must be inserted with the silver contacts facing outside,[https://wiki.veye.cc/index.php/ADP-MV1-V2_Adapter_Board_Data_Sheet Please refer to the physical connection diagram of the camera and the adapter plate ADP-MV1-V2.]
 =====Connection with Nano and NX using ADP-MV1=====
 The Nano Series and  NX Series are connected in this way.

@@ Line 400: / Line 400: @@
 <br />
 =====Connet to Orin Nano or Orin NX=====
-The RAW-MIPI-SC132M use a 15-to-22-pin same-side FFC cable, while other RAW series cameras use a 22-pin opposite-side FFC cable.[[File:RAW-MIPI-IMX462-ORIN NX.jpg|center|thumb|800x800px|RAW-MIPI-IMX462-ORIN NX|link=http://wiki.veye.cc/index.php/File:RAW-MIPI-IMX462-ORIN_NX.jpg]]
+The RAW-MIPI-SC132M use a 15-to-22-pin same-side FFC cable, while other RAW series cameras use a 22-pin opposite-side FFC cable.
+<br />
 ====RAW series cameras use the ADP-N5 connection====

@@ Line 360: / Line 360: @@
 |[[File:ADP-MV1-MV-MIPI-X 02.jpg|alt=|center|thumb|600x600px|ADP-MV1 to MV-MIPI-X]]
 |}
 =====Connection with Nano and NX using ADP-MV1=====
 The Nano Series and  NX Series are connected in this way.
 =====Connection with Orin Nano and NX using ADP-MV1=====
 Use a 15P to 22 pin FFC Cable with the Same-side contacts. Pay attention to the direction of the contact surface.
-[[File:MV camera connect to Orin Nano and Orin NX.jpg|center|thumb|800x800px|MV camera connect to Orin Nano and Orin NX]]
+<br />
+[[File:Mv-Orin NX.png|alt=MV camera connect to Orin Nano and Orin NX|center|thumb|700x700px|MV camera connect to Orin Nano and Orin NX]]
 ====MV series cameras use the ADP-N4 connection====
@@ Line 395: / Line 393: @@
 =====Connect to Nano or Xavier NX=====
-The RAW-MIPI-SC132M use a 15-pin opposite-side FFC cable, while other RAW series cameras use a 15-to-22-pin same-side FFC cable.[[File:RAW-MIPI-AR0234-NANO 01.jpg|center|thumb|800x800px|RAW camera and Jetson Nano connection|link=http://wiki.veye.cc/index.php/File:RAW-MIPI-AR0234-NANO_01.jpg]]
+The RAW-MIPI-SC132M use a 15-pin opposite-side FFC cable, while other RAW series cameras use a 15-to-22-pin same-side FFC cable.
 =====Connet to Orin Nano or Orin NX=====
 The RAW-MIPI-SC132M use a 15-to-22-pin same-side FFC cable, while other RAW series cameras use a 22-pin opposite-side FFC cable.[[File:RAW-MIPI-IMX462-ORIN NX.jpg|center|thumb|800x800px|RAW-MIPI-IMX462-ORIN NX|link=http://wiki.veye.cc/index.php/File:RAW-MIPI-IMX462-ORIN_NX.jpg]]

@@ Line 485: / Line 485: @@
 ===veye_viewer===
 [https://github.com/veyeimaging/veye_viewer veye_viewer] is an open-source Qt-based client application for VEYE IMAGING cameras.
 ===Description of raw data image format===
@@ Line 858: / Line 853: @@
 <code>python3 ./v4l2dev_2_opencv_show_grey.py --roix 0 --roiy 0  --width 640 --height 480 --fps 30</code>
 ====Trigger mode====