Difference between revisions of "Mini Adapter Board"
Jump to navigation
Jump to search
| Line 190: | Line 190: | ||
|} | |} | ||
| − | * '''Board Diagram''' | + | *'''Board Diagram''' |
| − | [[File:ADP-B CAD drawing.jpg|none|thumb|600x600px|ADP-B CAD drawing | | + | |
| + | [[File:ADP-B CAD drawing.jpg|none|thumb|600x600px| ADP-B CAD drawing | unit：mm|alt=]] | ||
[[Media:ADP-B CAD.dwg|Download dwg file here]] | [[Media:ADP-B CAD.dwg|Download dwg file here]] | ||
Revision as of 19:25, 19 January 2020
ADP-B Mini Adapter Board for Raspberry Pi Data Sheet
1 Introduction
Mini Adapter Board connect the Raspberry Pi:
Connect J2 interface and CSI-2 interface on Raspberry Pi with 1.00mm15pin pitch FFC cable(TypeB）.
2 Adapter Board Diagram, Layout
- J2 pin list, Top contact
| 1 | GND |
| 2 | MIPI_L0_N |
| 3 | MIPI_L0_P |
| 4 | GND |
| 5 | MIPI_L1_N |
| 6 | MIPI_L1_P |
| 7 | GND |
| 8 | MIPI_CK_N |
| 9 | MIPI_CK_P |
| 10 | GND |
| 11 | RESERVE, Not Connected |
| 12 | RESERVE, Not Connected |
| 13 | SCL_3.3V |
| 14 | SDA_3.3V |
| 15 | RESERVE, Not Connected |
- J3 pin list
| 1 | +5V |
| 2 | GND |
- J4 pin list
| 1 | +5V |
| 2 | GND |
- J1 pin list
| 1 | RESERVE, Not Connected | 2 | RESERVE, Not Connected |
| 3 | GND | 4 | RESERVE, Not Connected |
| 5 | RESERVE, Not Connected | 6 | RESERVE, Not Connected |
| 7 | RESERVE, Not Connected | 8 | RESERVE, Not Connected |
| 9 | GND | 10 | GND |
| 11 | RESERVE, Not Connected | 12 | RESERVE, Not Connected |
| 13 | RESERVE, Not Connected | 14 | RESERVE, Not Connected |
| 15 | GND | 16 | GND |
| 17 | MIPI_CK_P | 18 | SCL_3.3V |
| 19 | MIPI_CK_N | 20 | SDA_3.3V |
| 21 | GND | 22 | RESERVE, Not Connected |
| 23 | MIPI_L1_P | 24 | RESERVE, Not Connected |
| 25 | MIPI_L1_N | 26 | RESERVE, Not Connected |
| 27 | GND | 28 | RESERVE, Not Connected |
| 29 | MIPI_L0_P | 30 | RESERVE, Not Connected |
| 31 | MIPI_L0_N | 32 | RESERVE, Not Connected |
| 33 | GND | 34 | GND |
| 35 | GND | 36 | GND |
| 37 | VCC3V3 | 38 | VCC3V3 |
| 39 | VCC3V3 | 40 | VCC3V3 |
- Board Diagram
