Difference between revisions of "VEYE-MIPI-327 version log"
Jump to navigation
Jump to search
(Created blank page) |
|||
| Line 1: | Line 1: | ||
| + | [[VEYE-MIPI-327 version log/zh|查看中文]] | ||
| + | <br /> | ||
| + | |||
| + | === How to get version === | ||
| + | Using shell script [[VEYE-MIPI-290/327 i2c/|VEYE-MIPI-290/327 i2c]]，get '''hdver''', which is a 8bit register. | ||
| + | |||
| + | ===Version Log=== | ||
| + | <br /> | ||
| + | ====Version: 0x3==== | ||
| + | Release time：20100315 | ||
| + | |||
| + | *Support CSI-2 output enable/disable | ||
| + | *Add Capture mode, using i2c cmd to capture one picture | ||
| + | *Add framerate control for stream mode | ||
| + | *配合新版本接口板，支持通过硬件pin脚配置i2c address | ||
| + | *i2c address can be configured through the hardware pin( with the new version of the adaptor board) | ||
| + | |||
| + | <br /> | ||
| + | ====Version: 0x2==== | ||
| + | The first release version. | ||
Revision as of 20:16, 15 March 2020
1 How to get version
Using shell script VEYE-MIPI-290/327 i2c，get hdver, which is a 8bit register.
2 Version Log
2.1 Version: 0x3
Release time：20100315
- Support CSI-2 output enable/disable
- Add Capture mode, using i2c cmd to capture one picture
- Add framerate control for stream mode
- 配合新版本接口板，支持通过硬件pin脚配置i2c address
- i2c address can be configured through the hardware pin( with the new version of the adaptor board)
2.2 Version: 0x2
The first release version.