Difference between revisions of "Time-lapse photography"

From wiki_veye
Jump to navigation Jump to search
Line 5: Line 5:
  
 
视频链接地址移步[https://www.bilibili.com/video/BV1ZE411F7pB 这里]。(HardYun老刘的作品,''<u><big>未经作者授权,禁止转载,如需转载请联系作者本人</big></u>'')。     
 
视频链接地址移步[https://www.bilibili.com/video/BV1ZE411F7pB 这里]。(HardYun老刘的作品,''<u><big>未经作者授权,禁止转载,如需转载请联系作者本人</big></u>'')。     
 
 
<big>HardYun Lao liu's works, without the author's authorization, prohibited to reprint, if you need to reprint please contact the author</big>
 
  
 
To celebrate Raspberry PI's eighth birthday,[http://www.chaihuo.org/ @CHAIHUO MAKERS] (2020/3/14) held a Raspberry Jam online sharing event in shenzhen.[http://www.hardyun.com/ HardYun liu] was honored to share a Raspberry Pi time-lapse photography project at the event.The hardware used  
 
To celebrate Raspberry PI's eighth birthday,[http://www.chaihuo.org/ @CHAIHUO MAKERS] (2020/3/14) held a Raspberry Jam online sharing event in shenzhen.[http://www.hardyun.com/ HardYun liu] was honored to share a Raspberry Pi time-lapse photography project at the event.The hardware used  

Revision as of 15:18, 2 April 2020

Raspberry PI lovers use VEYE-MIPI-327 for Time-Lapse Photography

在2020/3/14为庆祝树莓派8岁的生日,@柴火创客空间 在深圳举行了Raspberry Jam的线上分享活动。作者HardYun老刘有幸在这次活动上,分享了一个树莓派延时摄影的项目。

硬件采用的树莓派4B,配合一个200万像素的摄像头,带白天黑夜模式切换功能,软件部分用Linux Shell脚本完成,每2分钟拍摄一张照片,最终用ffmpeg命令将所需的照片合成延时摄影视频。

视频链接地址移步这里。(HardYun老刘的作品,未经作者授权,禁止转载,如需转载请联系作者本人)。

To celebrate Raspberry PI's eighth birthday,@CHAIHUO MAKERS (2020/3/14) held a Raspberry Jam online sharing event in shenzhen.HardYun liu was honored to share a Raspberry Pi time-lapse photography project at the event.The hardware used

raspberry PI 4B, with a 2-megapixel camera, with day and night mode switching function, the software part of the use of Linux Shell script to complete, every 2 minutes to take a photo, and finally use ffmpeg command to the required photos into time-delay video.

Video link here...(HardYun Lao liu's works, without the author's authorization, prohibited to reprint, if you need to reprint please contact the author).