Difference between revisions of "CS-LAMP-IR Data Sheet"
| Line 58: | Line 58: | ||
|1 | |1 | ||
|NIGHT_O | |NIGHT_O | ||
| − | |High | + | |Active High |
|- | |- | ||
|2 | |2 | ||
| Line 66: | Line 66: | ||
|3 | |3 | ||
|NIGHT_O_n | |NIGHT_O_n | ||
| − | | | + | |Active Low, Open-Collector |
|} | |} | ||
==Board Dimension== | ==Board Dimension== | ||
All data in millimeters are shown below.[[File:CS-LAMP-IR CAD尺寸图.jpg|left|thumb|600x600px|CS-LAMP-IR CAD尺寸图]] | All data in millimeters are shown below.[[File:CS-LAMP-IR CAD尺寸图.jpg|left|thumb|600x600px|CS-LAMP-IR CAD尺寸图]] | ||
Revision as of 15:18, 2 December 2019
1 Introduction
The CS-LAMP-IR module is a light source for the camera module, which is started when the ambient light brightness is insufficient at night to provide necessary brightness for the camera and improve the imaging effect of the camera module.
The light source of the CS-LAMP-IR module is infrared light with a wavelength of about 850nm.The module has a built-in ambient illumination sensor. When the ambient light reaches the specified illumination, the module automatically turns on the infrared light, and
outputs a synchronization signals to the camera module to inform the camera module to switch day and night mode.
2 Technical Detail
| Technical Detail | |
|---|---|
| Power Supply | DC5V |
| Power Consumption | 550mW |
| Detection Wavelength | 390nm~700nm |
| IR LED Wave Length | 850nm |
3 Interface & Pin list
J1、J4 、J5 pins are connected in parallel, please choose them according to the situation.
J1
| 1 | DC 5V |
| 2 | GND |
J4
| 1 | DC 5V |
| 2 | GND |
J5
| 1 | DC 5V |
| 2 | GND |
J2
| 1 | NIGHT_O | Active High |
| 2 | GND | |
| 3 | NIGHT_O_n | Active Low, Open-Collector |
4 Board Dimension
All data in millimeters are shown below.
