Difference between revisions of "Mvcam firmware update manual"
| (5 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
===Applicable Product models=== | ===Applicable Product models=== | ||
| − | *MV MIPI series ( | + | * MV MIPI series (e.g., MV-MIPI-IMX178M ...) |
| − | *RAW MIPI series ( | + | * RAW MIPI series (e.g., RAW-MIPI-SC132M ...) |
| − | *VEYE-MIPI-IMX335 | + | * VEYE-MIPI-IMX335 |
=== How to upgrade camera firmware === | === How to upgrade camera firmware === | ||
| − | Each MIPI camera module | + | Each MIPI camera module features an I2C control interface, which is used to facilitate firmware upgrades via the I2C bus. |
| − | ==== | + | ==== Preparation ==== |
| − | You can | + | You can download the camera firmware upgrade package from the provided [https://www.mediafire.com/folder/4tov5s500gaif/camera_firmware_upgrade_images link]. The default file format is <code>ProductModel_Version_.bin</code>, for example, <code>MV-MIPI-IMX178M_C1.08_L1.02_upgrade.bin</code>. |
| − | + | To perform the upgrade, use the <code>veye_i2c_upgrade</code> tool. For different platforms, we provide the corresponding toolsets, such as <code>mv_tools_rpi</code>, which includes <code>veye_i2c_upgrade</code>. | |
| − | The mv_tools_rpi | + | The <code>mv_tools_rpi</code> toolset can be found on GitHub. |
| − | + | For instance, | |
| − | + | Raspberry Pi platform tools are available for download at this [https://github.com/veyeimaging/mvcam_raspberrypi/tree/main/mv_tools_rpi link]. | |
| − | + | Jetson platform tools at this [https://github.com/veyeimaging/nvidia_jetson_veye_bsp/tree/master/mv_tools_jetson/veye_upgrade link]. | |
| − | + | RK35XX platform tools at this [https://github.com/veyeimaging/rk35xx_firefly/tree/main/mv_tools_rockchip/veye_upgrade link]. | |
| − | + | ==== Upgrade Steps: ==== | |
| − | + | ===== Step 1: ===== | |
| + | Place the upgrade package (e.g., <code>MV-MIPI-IMX178M_C1.08_L1.02_upgrade.bin</code>) in the same directory as <code>veye_i2c_upgrade</code>. | ||
| − | + | ===== Step 2: ===== | |
| + | Ensure that the camera module is powered on. | ||
| − | * | + | * When using the V4L2 driver, the camera will power on and probe automatically during the Linux boot process—simply power on the board. |
| + | * For legacy Raspberry Pi models, you need to execute <code>camera_i2c_config</code> to power up the camera manually. | ||
| − | + | ===== Step 3: ===== | |
| + | Refer to this article to determine which I2C bus the camera is connected to. | ||
[http://wiki.veye.cc/index.php/I2c_bus_number_and_video_node i2c bus number on different boards] | [http://wiki.veye.cc/index.php/I2c_bus_number_and_video_node i2c bus number on different boards] | ||
| − | + | ===== Step 4: ===== | |
| − | |||
For the mv series, execute this command to read the current version： | For the mv series, execute this command to read the current version： | ||
| Line 45: | Line 48: | ||
<code>./veye5_mipi_i2c.sh -r -f version -b [i2c bus]</code> | <code>./veye5_mipi_i2c.sh -r -f version -b [i2c bus]</code> | ||
| − | + | ===== Step 5： ===== | |
| + | Execute the upgrade command. A progress prompt will appear during the process: | ||
| + | |||
| + | <code>sudo ./veye_i2c_upgrade [upgrade package file name] -b [i2c bus]</code> | ||
| − | + | If the upgrade fails, power cycle the camera and try again. | |
| − | + | ===== Step 6： ===== | |
| + | After the upgrade, the camera will restart automatically. Verify the new firmware version using the same commands as in Step 4. | ||
| − | + | For the mv series, execute this command to read the current version： | |
| − | + | <code>./mv_mipi_i2c.sh -r -f version -b [i2c bus]</code> | |
| + | |||
| + | For VEYE-MIPI-IMX335，execute this command to read the current version： | ||
<code>./veye5_mipi_i2c.sh -r -f version -b [i2c bus]</code> | <code>./veye5_mipi_i2c.sh -r -f version -b [i2c bus]</code> | ||
| − | + | ===== Step 7： ===== | |
| − | + | It’s recommended to restore the factory settings post-upgrade to prevent potential conflicts between the current configuration and the newly upgraded firmware: | |
| − | |||
| − | <code>./ | + | <code>./mv_mipi_i2c.sh -w -f factoryparam -b [i2c bus]</code> |
Latest revision as of 17:50, 12 September 2024
1 Applicable Product models
- MV MIPI series (e.g., MV-MIPI-IMX178M ...)
- RAW MIPI series (e.g., RAW-MIPI-SC132M ...)
- VEYE-MIPI-IMX335
2 How to upgrade camera firmware
Each MIPI camera module features an I2C control interface, which is used to facilitate firmware upgrades via the I2C bus.
2.1 Preparation
You can download the camera firmware upgrade package from the provided link. The default file format is ProductModel_Version_.bin, for example, MV-MIPI-IMX178M_C1.08_L1.02_upgrade.bin.
To perform the upgrade, use the veye_i2c_upgrade tool. For different platforms, we provide the corresponding toolsets, such as mv_tools_rpi, which includes veye_i2c_upgrade.
The mv_tools_rpi toolset can be found on GitHub.
For instance,
Raspberry Pi platform tools are available for download at this link.
Jetson platform tools at this link.
RK35XX platform tools at this link.
2.2 Upgrade Steps:
2.2.1 Step 1:
Place the upgrade package (e.g., MV-MIPI-IMX178M_C1.08_L1.02_upgrade.bin) in the same directory as veye_i2c_upgrade.
2.2.2 Step 2:
Ensure that the camera module is powered on.
- When using the V4L2 driver, the camera will power on and probe automatically during the Linux boot process—simply power on the board.
- For legacy Raspberry Pi models, you need to execute
camera_i2c_configto power up the camera manually.
2.2.3 Step 3:
Refer to this article to determine which I2C bus the camera is connected to.
i2c bus number on different boards
2.2.4 Step 4:
For the mv series, execute this command to read the current version：
./mv_mipi_i2c.sh -r -f version -b [i2c bus]
For VEYE-MIPI-IMX335，execute this command to read the current version：
./veye5_mipi_i2c.sh -r -f version -b [i2c bus]
2.2.5 Step 5：
Execute the upgrade command. A progress prompt will appear during the process:
sudo ./veye_i2c_upgrade [upgrade package file name] -b [i2c bus]
If the upgrade fails, power cycle the camera and try again.
2.2.6 Step 6：
After the upgrade, the camera will restart automatically. Verify the new firmware version using the same commands as in Step 4.
For the mv series, execute this command to read the current version：
./mv_mipi_i2c.sh -r -f version -b [i2c bus]
For VEYE-MIPI-IMX335，execute this command to read the current version：
./veye5_mipi_i2c.sh -r -f version -b [i2c bus]
2.2.7 Step 7：
It’s recommended to restore the factory settings post-upgrade to prevent potential conflicts between the current configuration and the newly upgraded firmware:
./mv_mipi_i2c.sh -w -f factoryparam -b [i2c bus]