Difference between revisions of "C-MOUNT01"
Jump to navigation
Jump to search
| (15 intermediate revisions by 2 users not shown) | |||
| Line 20: | Line 20: | ||
== Attention 注意事项 == | == Attention 注意事项 == | ||
| − | |||
| − | C-MOUNT01 is only a C-MOUNT lens mount. In order to fit the MV series and RAW series, '''''<u>the actual | + | === Overview 概述 === |
| + | C-MOUNT01仅仅是一个C-MOUNT镜头固定座，为了适配MV系列和RAW系列摄像机，'''''<u>实际后焦法兰焦距略小于17.526mm</u>'''''，配合不同型号的摄像机模组，需要将镜头向远离传感器的方向调整。具体数值需要根据传感器的成像面高度决定。 | ||
| + | |||
| + | C-MOUNT01 is only a C-MOUNT lens mount. In order to fit the MV series and RAW series camera, '''''<u>the actual Flange BFL distance is less than 17.526mm</u>'''''. With different camera modules, | ||
the lens needs to be adjusted away from the sensor. The specific value needs to be determined according to the sensor's imaging surface height. | the lens needs to be adjusted away from the sensor. The specific value needs to be determined according to the sensor's imaging surface height. | ||
| Line 32: | Line 34: | ||
|[[File:C MOUNT-LENS 01.jpg|thumb]] | |[[File:C MOUNT-LENS 01.jpg|thumb]] | ||
|} | |} | ||
| − | < | + | |
| + | === 镜头向远离传感器方向偏移距离 “Da” 的计算：Calculation of lens offset distance “Da” away from the sensor === | ||
| + | '''<big>''Da = Dc - ( H - Ds )''</big>''' | ||
| + | |||
| + | '''法兰后焦距 / Flange BFL''' ：Dc = 17.526mm | ||
| + | |||
| + | '''C-MOUNT01高度 / The Height of C-MOUNT01'''：H= 18mm | ||
| + | |||
| + | '''传感器底面到感光面的距离 / Distance from the bottom of the sensor to the effective image''' '''area'''：Ds | ||
| + | {| class="wikitable" | ||
| + | |+ | ||
| + | Parameter 参数表 | ||
| + | |||
| + | !Part NO. / 型号 | ||
| + | !Ds (mm) | ||
| + | !Da(mm) | ||
| + | |- | ||
| + | |[[MV-MIPI-IMX296M Index|MV-MIPI-IMX296M]] | ||
| + | |0.92 | ||
| + | |0.446 | ||
| + | |- | ||
| + | |[[MV-MIPI-IMX178 Index|MV-MIPI-IMX178M]] | ||
| + | |0.92 | ||
| + | |0.446 | ||
| + | |- | ||
| + | | | ||
| + | [[MV-MIPI-IMX265M Index|MV-MIPI-IMX265M]] | ||
| + | |0.92 | ||
| + | |0.446 | ||
| + | |- | ||
| + | | | ||
| + | [[MV-MIPI-IMX264M Index|MV-MIPI-IMX264M]] | ||
| + | |0.92 | ||
| + | |0.446 | ||
| + | |- | ||
| + | | | ||
| + | [[MV-MIPI-IMX287M Index|MV-MIPI-IMX287M]] | ||
| + | |0.92 | ||
| + | |0.446 | ||
| + | |- | ||
| + | | | ||
| + | [[RAW-MIPI-IMX462M Index|RAW-MIPI-IMX462M]] | ||
| + | |0.62 | ||
| + | |0.146 | ||
| + | |- | ||
| + | |[[MV-MIPI-SC130M Index|MV-MIPI-SC130M]] | ||
| + | |0.6 | ||
| + | |0.126 | ||
| + | |} | ||
| + | |||
==Dimension 尺寸图== | ==Dimension 尺寸图== | ||
[[File:C-MOUNT01 Dimensional Drawing.pdf|center|thumb|1500x1500px|C-MOUNT01 Dimensional Drawing|alt=]] | [[File:C-MOUNT01 Dimensional Drawing.pdf|center|thumb|1500x1500px|C-MOUNT01 Dimensional Drawing|alt=]] | ||
Latest revision as of 11:05, 14 March 2024
1 Product Picture 产品图片
| Product Picture 产品图片 | Product Picture 产品图片 | Camera Support 支持的相机 |
| MV-MIPI-IMX178M |
2 Attention 注意事项
2.1 Overview 概述
C-MOUNT01仅仅是一个C-MOUNT镜头固定座，为了适配MV系列和RAW系列摄像机，实际后焦法兰焦距略小于17.526mm，配合不同型号的摄像机模组，需要将镜头向远离传感器的方向调整。具体数值需要根据传感器的成像面高度决定。
C-MOUNT01 is only a C-MOUNT lens mount. In order to fit the MV series and RAW series camera, the actual Flange BFL distance is less than 17.526mm. With different camera modules,
the lens needs to be adjusted away from the sensor. The specific value needs to be determined according to the sensor's imaging surface height.
| Not adjusted / 未调整 | Adjusted / 向外调整 |
|---|---|
2.2 镜头向远离传感器方向偏移距离 “Da” 的计算：Calculation of lens offset distance “Da” away from the sensor
Da = Dc - ( H - Ds )
法兰后焦距 / Flange BFL ：Dc = 17.526mm
C-MOUNT01高度 / The Height of C-MOUNT01：H= 18mm
传感器底面到感光面的距离 / Distance from the bottom of the sensor to the effective image area：Ds
| Part NO. / 型号 | Ds (mm) | Da(mm) |
|---|---|---|
| MV-MIPI-IMX296M | 0.92 | 0.446 |
| MV-MIPI-IMX178M | 0.92 | 0.446 |
| 0.92 | 0.446 | |
| 0.92 | 0.446 | |
| 0.92 | 0.446 | |
| 0.62 | 0.146 | |
| MV-MIPI-SC130M | 0.6 | 0.126 |
3 Dimension 尺寸图
