Difference between revisions of "CS-USB-IMX307"
Jump to navigation
Jump to search
(36 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
[[CS-USB-IMX307/zh|查看中文]] | [[CS-USB-IMX307/zh|查看中文]] | ||
+ | <big><big><big>'''CS-USB-IMX307 Data Sheet'''</big></big></big> | ||
==Introduction== | ==Introduction== | ||
− | CS-USB-IMX307 is a cost-effective USB camera. This module use the SONY STARVIS CMOS image sensor IMX307LQD-C,built-in ISP processing. | + | CS-USB-IMX307 / CS-USB-IMX307-V2.0 is a cost-effective USB camera. This module use the SONY STARVIS CMOS image sensor IMX307LQD-C,built-in ISP processing. |
Users can easily integrate into embedded systems or PC platforms via USB interface. | Users can easily integrate into embedded systems or PC platforms via USB interface. | ||
[[File:CS-USB-IMX307 TOP.jpg|thumb|CS-USB-IMX307 TOP]] | [[File:CS-USB-IMX307 TOP.jpg|thumb|CS-USB-IMX307 TOP]] | ||
[[File:CS-USB-IMX307 BOTTOM.jpg|thumb|CS-USB-IMX307 BOTTOM]] | [[File:CS-USB-IMX307 BOTTOM.jpg|thumb|CS-USB-IMX307 BOTTOM]] | ||
+ | [[File:CS-USB-IMX307-V2.0 001.jpg|alt=|thumb|CS-USB-IMX307-V2.0 TOP]] | ||
+ | [[File:CS-USB-IMX307-V2.0 002.jpg|alt=|thumb|CS-USB-IMX307-V2.0 BOTTOM]] | ||
==Features== | ==Features== | ||
Line 13: | Line 16: | ||
*Built-in ISP processing | *Built-in ISP processing | ||
*USB2.0 Interface,USB Video Class('''UVC''') | *USB2.0 Interface,USB Video Class('''UVC''') | ||
− | *Data fromat : ''' | + | *Data fromat : '''YUY2''' / '''MJPG''' / '''H.264''' |
*Standard lens mount | *Standard lens mount | ||
*IR-CUT circuit | *IR-CUT circuit | ||
− | + | *Brightness, Contrast, Sharpness, Saturation <br /> | |
− | *Brightness, Contrast, Sharpness, Saturation | ||
==Thechnical Detail== | ==Thechnical Detail== | ||
Line 26: | Line 28: | ||
|- | |- | ||
|Sensor | |Sensor | ||
− | |SONY IMX307LQD-C STARVIS | + | |SONY [https://www.sony-semicon.co.jp/products/common/pdf/IMX307LQD_LQR_Flyer02.pdf IMX307LQD-C] STARVIS |
|- | |- | ||
|Pixels | |Pixels | ||
Line 32: | Line 34: | ||
|- | |- | ||
|Resolution | |Resolution | ||
− | |1920*1080 | + | |1920*1080 MAX |
|- | |- | ||
|Image Size | |Image Size | ||
Line 40: | Line 42: | ||
|2.9um (H)*2.9um(V) | |2.9um (H)*2.9um(V) | ||
|- | |- | ||
− | |[https://www.sony-semicon.co.jp/e/products/IS/security/technology.html ''''' | + | |[https://www.sony-semicon.co.jp/e/products/IS/security/technology.html '''''SNR1s Value'''''] |
|0.24lx | |0.24lx | ||
|- | |- | ||
| colspan="2" |'''ISP''' | | colspan="2" |'''ISP''' | ||
|- | |- | ||
− | |Frame Rate | + | |YUY2 Frame Rate |
− | | | + | |640*360@25fps / 30fps |
+ | |- | ||
+ | |MJPG Frame Rate | ||
+ | |1920*1080@25fps / 30fps, 1280*720@50fps / 60fps, 640*360@25fps / 30fps | ||
+ | |- | ||
+ | |H.264 Frame Rate | ||
+ | |1920*1080@25fps / 30fps, 1280*720@50fps / 60fps, 640*360@25fps / 30fps | ||
|- | |- | ||
|Exposure | |Exposure | ||
− | |Auto | + | |Auto |
|- | |- | ||
|White Balance | |White Balance | ||
− | |Auto | + | |Auto |
|- | |- | ||
|Shutter | |Shutter | ||
− | |1/25(1/30)s to 1/ | + | |1/25(1/30)s to 1/20,000s |
|- | |- | ||
|Slow Shutter | |Slow Shutter | ||
− | | | + | |N.A. |
|- | |- | ||
|Denoising | |Denoising | ||
|2D/3D noise reduction | |2D/3D noise reduction | ||
|- | |- | ||
− | |Image | + | |Image Features |
|Brightness, Contrast, Sharpness, Saturation,Flip, Mirror | |Brightness, Contrast, Sharpness, Saturation,Flip, Mirror | ||
− | |||
− | |||
− | |||
|- | |- | ||
|Day/Night Switch | |Day/Night Switch | ||
Line 83: | Line 88: | ||
|2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing | |2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing | ||
|- | |- | ||
− | | colspan="2" |Interface | + | | colspan="2" |'''Interface''' |
|- | |- | ||
|Connector | |Connector | ||
Line 97: | Line 102: | ||
|3.3VDC to 5VDC compatibility | |3.3VDC to 5VDC compatibility | ||
|- | |- | ||
− | | colspan="2" |General | + | | colspan="2" |'''General''' |
|- | |- | ||
|Operating Conditions | |Operating Conditions | ||
− | | -10℃~ | + | | -10℃~60℃, Humidity 95% or less, non-condensing |
|- | |- | ||
|Power Supply | |Power Supply | ||
Line 106: | Line 111: | ||
|- | |- | ||
|Power Consumption | |Power Consumption | ||
− | |5VDC,1.5W | + | |5VDC,1.5W without IRCUT,2W when Drive IRCUT |
|- | |- | ||
|Dimension | |Dimension | ||
|38mm*38mm*10mm(not include lens and lens mount) | |38mm*38mm*10mm(not include lens and lens mount) | ||
− | |} | + | |} |
+ | |||
==Interface & Pin list== | ==Interface & Pin list== | ||
− | [[File:CS-USB-IMX307 TOP PIC.jpg|thumb|CS-USB-IMX307 TOP | + | [[File:CS-USB-IMX307 TOP PIC.jpg|thumb|CS-USB-IMX307 TOP VIEW |alt=|500x500px]] |
− | [[File:CS-USB-IMX307 BIF.jpg|thumb|CS-USB-IMX307 BOTTOM INTERFACE]] | + | [[File:CS-USB-IMX307 BIF.jpg|thumb|CS-USB-IMX307 BOTTOM INTERFACE|alt=|500x500px]] |
− | + | [[File:CS-USB-IMX307-V2.0 003.jpg|alt=|thumb|499x499px|CS-USB-IMX307-V2.0 TOP VIEW]] | |
− | ===J1:USB2.0 Interface | + | [[File:CS-USB-IMX307-V2.0 005.jpg|alt=|thumb|500x500px|CS-USB-IMX307-V2.0 BOTTOM INTERFACE]] |
+ | {| class="wikitable" | ||
+ | | colspan="3" |'''J1:USB2.0 Interface''' | ||
+ | |- | ||
+ | |'''Pin NO.''' | ||
+ | |'''NAME''' | ||
+ | |'''Remarks''' | ||
+ | |- | ||
+ | |1 | ||
+ | |VBUS(5VDC) | ||
+ | |from USB HOST | ||
+ | |- | ||
+ | |2 | ||
+ | |D- | ||
+ | | | ||
+ | |- | ||
+ | |3 | ||
+ | |D+ | ||
+ | | | ||
+ | |- | ||
+ | |4 | ||
+ | |GND | ||
+ | | | ||
+ | |} | ||
{| class="wikitable" | {| class="wikitable" | ||
+ | | colspan="3" |'''CS-USB-IMX307-V2.0 only have''' | ||
+ | |- | ||
+ | | colspan="3" |'''J14:Micro B USB2.0 Interface''' | ||
+ | |- | ||
+ | |'''Pin NO.''' | ||
+ | |'''NAME''' | ||
+ | |'''Remarks''' | ||
+ | |- | ||
|1 | |1 | ||
− | |VBUS( | + | |VBUS(5VDC) |
+ | |from USB HOST | ||
|- | |- | ||
|2 | |2 | ||
|D- | |D- | ||
+ | | | ||
|- | |- | ||
|3 | |3 | ||
|D+ | |D+ | ||
+ | | | ||
|- | |- | ||
|4 | |4 | ||
|GND | |GND | ||
+ | | | ||
+ | |- | ||
+ | |5 | ||
+ | |ID | ||
+ | |NC | ||
|} | |} | ||
− | + | ||
{| class="wikitable" | {| class="wikitable" | ||
+ | | colspan="3" |'''J3:Power Input, Used during firmware upgrade''' | ||
+ | |- | ||
+ | |'''Pin NO.''' | ||
+ | |'''NAME''' | ||
+ | |'''Remarks''' | ||
+ | |- | ||
|1 | |1 | ||
− | |5VDC IN | + | |5VDC |
+ | |5V IN | ||
|- | |- | ||
|2 | |2 | ||
|NC | |NC | ||
+ | | | ||
|- | |- | ||
|3 | |3 | ||
|NC | |NC | ||
+ | | | ||
|- | |- | ||
|4 | |4 | ||
|GND | |GND | ||
+ | | | ||
|} | |} | ||
− | |||
{| class="wikitable" | {| class="wikitable" | ||
+ | | colspan="3" |'''J4:Day/Night External Trigger''' | ||
+ | |- | ||
+ | |'''Pin NO.''' | ||
+ | |'''NAME''' | ||
+ | |'''Remarks''' | ||
+ | |- | ||
|1 | |1 | ||
− | |IR LED ON | + | |IR LED ON |
+ | |INPUT,ACTIVE LOW | ||
|- | |- | ||
|2 | |2 | ||
|GND | |GND | ||
+ | | | ||
|- | |- | ||
|3 | |3 | ||
|RESERVE | |RESERVE | ||
+ | | | ||
|} | |} | ||
− | + | ||
{| class="wikitable" | {| class="wikitable" | ||
+ | | colspan="3" |'''J6:IRCUT Control''' | ||
+ | |- | ||
+ | |'''Pin NO.''' | ||
+ | |'''NAME''' | ||
+ | |'''Remarks''' | ||
+ | |- | ||
|1 | |1 | ||
|IRCUT1 | |IRCUT1 | ||
+ | | | ||
|- | |- | ||
|2 | |2 | ||
|IRCUT2 | |IRCUT2 | ||
+ | | | ||
|} | |} | ||
− | |||
{| class="wikitable" | {| class="wikitable" | ||
+ | | colspan="5" |'''J6 IRCUT Control Functional specifications''' | ||
+ | |- | ||
+ | |'''MODE''' | ||
+ | |'''pin''' | ||
+ | |'''Signal polarity''' | ||
+ | |'''Image type''' | ||
+ | |'''Filter position''' | ||
+ | |- | ||
+ | | rowspan="2" |Mode 1 | ||
+ | |IRCUT1 | ||
+ | | + | ||
+ | | rowspan="2" |color | ||
+ | | rowspan="2" |Infrared cutoff | ||
+ | |- | ||
+ | |IRCUT2 | ||
+ | | - | ||
+ | |- | ||
+ | | rowspan="2" |Mode 2 | ||
+ | |IRCUT1 | ||
+ | | - | ||
+ | | rowspan="2" |mono | ||
+ | | rowspan="2" |Full wavelength pass | ||
+ | |- | ||
+ | |IRCUT2 | ||
+ | | + | ||
+ | |} | ||
+ | {| class="wikitable" | ||
+ | | colspan="3" |'''J7:Configurable GPIO ( ''RESERVE'' )''' | ||
+ | |- | ||
+ | |'''Pin NO.''' | ||
+ | |'''NAME''' | ||
+ | |'''Remarks''' | ||
+ | |- | ||
|1 | |1 | ||
− | | | + | |GPIO0 |
+ | |Can Be Configured | ||
|- | |- | ||
|2 | |2 | ||
|GND | |GND | ||
+ | | | ||
|- | |- | ||
|3 | |3 | ||
− | | | + | |GPIO1 |
− | |} | + | |Can Be Configured |
+ | |} | ||
==Board Dimension== | ==Board Dimension== | ||
− | [[File:CS-USB-IMX307 | + | [[File:CS-USB-IMX307 CAD drawing.jpg|thumb|600x600px|CS-USB-IMX307 CAD drawing / unit : mm|alt=|none]] |
− | + | [[Media:CS-USB-IMX307 CAD.dwg|Download dwg file here]] | |
− | + | [[File:CS-USB-IMX307-V2.0 CAD.jpg|alt=|none|thumb|600x600px|CS-USB-IMX307-V2.0 CAD drawing / unit : mm]] | |
− | + | [[Media:CS-USB-IMX307V2.0-DWG.dwg|Download dwg file here]] | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | == PCBA 3D STP File == | |
+ | [[Media:3D CS-USB-IMX307.zip|download 3D STP file]] |
Latest revision as of 14:48, 23 August 2023
CS-USB-IMX307 Data Sheet
1 Introduction
CS-USB-IMX307 / CS-USB-IMX307-V2.0 is a cost-effective USB camera. This module use the SONY STARVIS CMOS image sensor IMX307LQD-C,built-in ISP processing.
Users can easily integrate into embedded systems or PC platforms via USB interface.
2 Features
- SONY IMX307 STARVIS Sensor, 1/2.8 inch 2 Mega
- Built-in ISP processing
- USB2.0 Interface,USB Video Class(UVC)
- Data fromat : YUY2 / MJPG / H.264
- Standard lens mount
- IR-CUT circuit
- Brightness, Contrast, Sharpness, Saturation
3 Thechnical Detail
Technical Details | |
SENSOR | |
Sensor | SONY IMX307LQD-C STARVIS |
Pixels | 2.07M pixels |
Resolution | 1920*1080 MAX |
Image Size | Diagonal 6.46 mm (Type 1/2.8) |
Unit Cell Size | 2.9um (H)*2.9um(V) |
SNR1s Value | 0.24lx |
ISP | |
YUY2 Frame Rate | 640*360@25fps / 30fps |
MJPG Frame Rate | 1920*1080@25fps / 30fps, 1280*720@50fps / 60fps, 640*360@25fps / 30fps |
H.264 Frame Rate | 1920*1080@25fps / 30fps, 1280*720@50fps / 60fps, 640*360@25fps / 30fps |
Exposure | Auto |
White Balance | Auto |
Shutter | 1/25(1/30)s to 1/20,000s |
Slow Shutter | N.A. |
Denoising | 2D/3D noise reduction |
Image Features | Brightness, Contrast, Sharpness, Saturation,Flip, Mirror |
Day/Night Switch | Manual or IR-CUT filter with external trigger |
Lens & IR-CUT | |
Lens | Support M12*0.5 or M16*0.5 depend on lens mount |
Lens Mount with IR-CUT | MTV12 or MTV16 |
Mounting Hole | 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing |
Interface | |
Connector | MX1.25*4,USB2.0 Interface |
Communication Interface | USB2.0,UVC Protocol |
IR-CUT Control | IR-CUT motor control, 3.3VDC |
Day/Night External Trigger | 3.3VDC to 5VDC compatibility |
General | |
Operating Conditions | -10℃~60℃, Humidity 95% or less, non-condensing |
Power Supply | 5VDC |
Power Consumption | 5VDC,1.5W without IRCUT,2W when Drive IRCUT |
Dimension | 38mm*38mm*10mm(not include lens and lens mount) |
4 Interface & Pin list
J1:USB2.0 Interface | ||
Pin NO. | NAME | Remarks |
1 | VBUS(5VDC) | from USB HOST |
2 | D- | |
3 | D+ | |
4 | GND |
CS-USB-IMX307-V2.0 only have | ||
J14:Micro B USB2.0 Interface | ||
Pin NO. | NAME | Remarks |
1 | VBUS(5VDC) | from USB HOST |
2 | D- | |
3 | D+ | |
4 | GND | |
5 | ID | NC |
J3:Power Input, Used during firmware upgrade | ||
Pin NO. | NAME | Remarks |
1 | 5VDC | 5V IN |
2 | NC | |
3 | NC | |
4 | GND |
J4:Day/Night External Trigger | ||
Pin NO. | NAME | Remarks |
1 | IR LED ON | INPUT,ACTIVE LOW |
2 | GND | |
3 | RESERVE |
J6:IRCUT Control | ||
Pin NO. | NAME | Remarks |
1 | IRCUT1 | |
2 | IRCUT2 |
J6 IRCUT Control Functional specifications | ||||
MODE | pin | Signal polarity | Image type | Filter position |
Mode 1 | IRCUT1 | + | color | Infrared cutoff |
IRCUT2 | - | |||
Mode 2 | IRCUT1 | - | mono | Full wavelength pass |
IRCUT2 | + |
J7:Configurable GPIO ( RESERVE ) | ||
Pin NO. | NAME | Remarks |
1 | GPIO0 | Can Be Configured |
2 | GND | |
3 | GPIO1 | Can Be Configured |