Difference between revisions of "CS-LAMP-IR Data Sheet"

From wiki_veye
Jump to navigation Jump to search
 
(34 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
<br />
+
[[CS-LAMP-IR Data Sheet/zh|查看中文]]<br />
 +
<big><big><big>'''CS-LAMP-IR Data Sheet'''</big></big></big>
 +
=='''Introduction'''==
 +
The CS-LAMP-IR module is a light source for the camera module, which is started when the ambient light brightness is insufficient at night to provide necessary brightness for the camera and improve the imaging effect of the camera module.
  
−
== '''产品概要''' ==
+
The light source of the CS-LAMP-IR module is infrared light with a wavelength of about 850nm.The module has a built-in ambient illumination sensor.
−
   CS-IRLAMP BOARD用来检测环境光亮度，在亮度低至阈值时，开启红外灯，同时输出日夜（红外灯关闭/开启）状态，为红外滤光片的切换提供依据。
 
  
−
== '''技术细节''' ==
+
When the ambient light reaches the specified illumination, the module automatically turns on the infrared light, and outputs a synchronization signals to the camera module to inform the camera module to switch day and night mode.
−
供电             DC 5V
 
  
−
功耗            550mW
+
=='''Technical Detail'''==
 +
{| class="wikitable"
 +
|'''Technical Detail'''
 +
|'''Remarks'''
 +
|-
 +
|Power Supply
 +
|DC5V
 +
|-
 +
|Power Consumption
 +
|690mW
 +
|-
 +
|Detection Wavelength
 +
|390nm~700nm
 +
|-
 +
|IR LED Wave Length
 +
|850nm
 +
|}
 +
[[File:CS-LAMP-IR-TOP Interface.jpg|thumb|CS-LAMP-IR-TOP Interface|alt=|600x600px]][[File:CS-LAMP-IR-003 BOT Interface.jpg|thumb|CS-LAMP-IR BOT Interface|alt=|600x600px|link=http://wiki.veye.cc/index.php/File:CS-LAMP-IR-003_BOT_Interface.jpg]]
  
−
检测波长     390nm~700nm
+
=='''Interface & Pin list'''==
−
 
+
'''''J1、J4 、J5 pins are connected in parallel''''', please choose them according to the situation.
−
红外灯波长  850nm
 
−
 
 
−
== '''接口定义''' ==
 
−
J1、J4 、J5引脚并联，可视情况选用。
 
−
 
 
−
'''J1 引脚定义'''
 
 
{| class="wikitable"
 
{| class="wikitable"
 +
| colspan="3" |'''J1'''
 +
|-
 +
|'''Pin NO.'''
 +
|'''NAME'''
 +
|'''Remarks'''
 +
|-
 
|1
 
|1
 
|DC 5V
 
|DC 5V
 +
|PWR
 
|-
 
|-
 
|2
 
|2
 
|GND
 
|GND
 +
|
 
|}
 
|}
−
'''J4 引脚定义'''
 
 
{| class="wikitable"
 
{| class="wikitable"
 +
| colspan="3" |'''J2： IR led on status'''
 +
|-
 +
|'''Pin NO.'''
 +
|'''NAME'''
 +
|'''Remarks'''
 +
|-
 
|1
 
|1
−
|DC 5V
+
|NIGHT_O
 +
|OUTPUT, Active High
 
|-
 
|-
 
|2
 
|2
 
|GND
 
|GND
 +
|
 +
|-
 +
|3
 +
|NIGHT_O_n  
 +
|OUTPUT, Active Low,  Open-Collector
 
|}
 
|}
−
'''J5 引脚定义'''
 
 
{| class="wikitable"
 
{| class="wikitable"
 +
| colspan="3" |'''J4'''
 +
|-
 +
|'''Pin NO.'''
 +
|'''NAME'''
 +
|'''Remarks'''
 +
|-
 
|1
 
|1
 
|DC 5V
 
|DC 5V
 +
|PWR
 
|-
 
|-
 
|2
 
|2
 
|GND
 
|GND
 +
|
 
|}
 
|}
−
'''J2 引脚定义'''
 
 
{| class="wikitable"
 
{| class="wikitable"
 +
| colspan="3" |'''J5'''
 +
|-
 +
|'''Pin NO.'''
 +
|'''NAME'''
 +
|'''Remarks'''
 +
|-
 
|1
 
|1
−
|NIGHT_O,  High Level active
+
|DC 5V
 +
|PWR
 
|-
 
|-
 
|2
 
|2
 
|GND
 
|GND
−
|-
+
|
−
|3
 
−
|NIGHT_O_n,  Complementary NIGHT_O,  Open-Collector
 
 
|}
 
|}
 +
 +
==Board Dimension==
 +
<br />
 +
[[File:CS-LAMP-IR结构图纸.jpg|thumb|600x600px| CS-LAMP-IR CAD drawing / unit : mm|alt=|none]]
 +
[[Media:CS-LAMP-IR CAD.dwg|Download dwg file here]]

Latest revision as of 14:14, 4 November 2022

查看中文
CS-LAMP-IR Data Sheet

1 Introduction

The CS-LAMP-IR module is a light source for the camera module, which is started when the ambient light brightness is insufficient at night to provide necessary brightness for the camera and improve the imaging effect of the camera module.

The light source of the CS-LAMP-IR module is infrared light with a wavelength of about 850nm.The module has a built-in ambient illumination sensor.

When the ambient light reaches the specified illumination, the module automatically turns on the infrared light, and outputs a synchronization signals to the camera module to inform the camera module to switch day and night mode.

2 Technical Detail

Technical Detail Remarks
Power Supply DC5V
Power Consumption 690mW
Detection Wavelength 390nm~700nm
IR LED Wave Length 850nm
CS-LAMP-IR-TOP Interface
CS-LAMP-IR BOT Interface

3 Interface & Pin list

J1、J4 、J5 pins are connected in parallel, please choose them according to the situation.

J1
Pin NO. NAME Remarks
1 DC 5V PWR
2 GND
J2： IR led on status
Pin NO. NAME Remarks
1 NIGHT_O OUTPUT, Active High
2 GND
3 NIGHT_O_n   OUTPUT, Active Low,  Open-Collector
J4
Pin NO. NAME Remarks
1 DC 5V PWR
2 GND
J5
Pin NO. NAME Remarks
1 DC 5V PWR
2 GND

4 Board Dimension


CS-LAMP-IR CAD drawing / unit : mm

Download dwg file here

Retrieved from "http://wiki.veye.cc/index.php?title=CS-LAMP-IR_Data_Sheet&oldid=6048"