Difference between revisions of "VEYE-MIPI-290/327"
Jump to navigation
Jump to search
| Line 113: | Line 113: | ||
|38mm*38mm*8mm(not include lens and lens mount) | |38mm*38mm*8mm(not include lens and lens mount) | ||
|} | |} | ||
| − | |||
| − | |||
| − | |||
| − | |||
==Diagram, Layout and Dimension== | ==Diagram, Layout and Dimension== | ||
| Line 248: | Line 244: | ||
==Imaging Effect== | ==Imaging Effect== | ||
| − | * [https://www.youtube.com/watch?v=c-AlAXgdazw veye-mipi-327 vs. veye-mipi-290 indoor light environment effect] | + | *[https://www.youtube.com/watch?v=c-AlAXgdazw veye-mipi-327 vs. veye-mipi-290 indoor light environment effect] |
| − | * [https://www.youtube.com/watch?v=OvJQoKfDb4M Raspberry pi platform veye-mipi-290 vs. The default camera ov5647 effect] | + | *[https://www.youtube.com/watch?v=OvJQoKfDb4M Raspberry pi platform veye-mipi-290 vs. The default camera ov5647 effect] |
* | * | ||
| Line 256: | Line 252: | ||
Support a variety of platforms, as follows: | Support a variety of platforms, as follows: | ||
| − | * [[VEYE-MIPI-290/327 for Raspberry Pi|Raspberry Pi]] | + | *[[VEYE-MIPI-290/327 for Raspberry Pi|Raspberry Pi]] |
| − | * [[VEYE MIPI 290/327 for Nano Pi|Rockchip RK3399]] | + | *[[VEYE MIPI 290/327 for Nano Pi|Rockchip RK3399]] |
| − | * [[VEYE MIPI 290/327 for Jetson Nano|NVIDIA Jetson Nano]] | + | *[[VEYE MIPI 290/327 for Jetson Nano|NVIDIA Jetson Nano]] |
| − | * NXP IMX8M :TODO | + | *NXP IMX8M :TODO |
==Resources== | ==Resources== | ||
Revision as of 16:12, 9 December 2019
1 Introduction
Veye-mipi-290/327 is a camera module created by Tianjin Zhongan Yijia technology co., LTD., with excellent low illumination and wide dynamic performance.This module only has 38*38*8mm, which is convenient for integration and can be connected to various embedded motherboards with adapter board.Suitable for machine vision, intelligent analysis, industrial control, face recognition, ADAS etc...
2 Features
- 1/2.8 inch 2 Mega STARVIS sensor IMX290/IMX327 by SONY
- MIPI output: CSI-2 (VEYE-MIPI-290/VEYE-MIPI-327 support)
- Uncompressed UYVY format, YUV422-8bit
- Standard lens mount
- IR-CUT circuit
- BLC, DOL-WDR, 2D/3D noise reduction, Anti-fog
- Brightness, Contrast, Sharpness, Saturation adjustable
- Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, JETSON NANO,TX2
3 Thechnical Detail
| Technical Details | |
| SENSOR | |
| Sensor | SONY IMX290LQR-C/IMX327LQR-C STARVIS |
| Pixels | 2.07M pixels |
| Resolution | 1920*1080 |
| Image Size | Diagonal 6.46 mm (Type 1/2.8) |
| Unit Cell Size | 2.9um (H)*2.9um(V) |
| SNR1s Value | 0.23lx / 0.18lx |
| ISP | |
| Frame Rate | 1080p@25 / 1080p@30fps |
| Exposure | Auto or Manual |
| White Balance | Auto or Manual |
| Shutter | 1/25(1/30)s to 1/50,000s |
| Slow Shutter | Support |
| Denoising | 2D/3D noise reduction |
| Image Setting | Brightness, Contrast, Sharpness, Saturation,Flip, Mirror |
| Image Enhancement | BLC, DOL-WDR, Defog |
| Day/Night Switch | Manual or IR-CUT filter with external trigger |
| Lens & IR-CUT | |
| Lens | Support M12*0.5 or M16*0.5 depend on lens mount |
| Lens Mount with IR-CUT | MTV12 or MTV16 |
| Mounting Hole | 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing |
| Interface | |
| PCB Connector | BTB connector:BTB050040-F1D |
| Communication Interface | IIC, 3.3VDC |
| Video Data Interface | MIPI:2 Data Lanes, CSI2 YUV422-8bit Data Type, Bandwidth 1.188Gbps |
| IR-CUT Control | IR-CUT motor control, 3.3VDC |
| Day/Night External Trigger | 3.3VDC to 12VDC compatibility |
| General | |
| Operating Conditions | -10℃~50℃, Humidity 95% or less, non-condensing |
| Power Supply | 3.3VDC |
| Power Consumption | 3.3VDC,1.2W |
| Dimension | 38mm*38mm*8mm(not include lens and lens mount) |
4 Diagram, Layout and Dimension
- J5 pin list
| 1 | RESERVE, Not Connected | 2 | RESERVE, Not Connected |
| 3 | GND | 4 | RESERVE, Not Connected |
| 5 | RESERVE, Not Connected | 6 | RESERVE, Not Connected |
| 7 | RESERVE, Not Connected | 8 | RESERVE, Not Connected |
| 9 | GND | 10 | GND |
| 11 | RESERVE, Not Connected | 12 | RESERVE, Not Connected |
| 13 | RESERVE, Not Connected | 14 | RESERVE, Not Connected |
| 15 | GND | 16 | GND |
| 17 | MIPI_CK_P | 18 | SCL_3.3V |
| 19 | MIPI_CK_N | 20 | SDA_3.3V |
| 21 | GND | 22 | RESERVE, Not Connected |
| 23 | MIPI_L1_P | 24 | RESERVE, Not Connected |
| 25 | MIPI_L1_N | 26 | RESERVE, Not Connected |
| 27 | GND | 28 | RESERVE, Not Connected |
| 29 | MIPI_L0_P | 30 | RESERVE, Not Connected |
| 31 | MIPI_L0_N | 32 | RESERVE, Not Connected |
| 33 | GND | 34 | GND |
| 35 | GND | 36 | GND |
| 37 | VCC3V3 | 38 | VCC3V3 |
| 39 | VCC3V3 | 40 | VCC3V3 |
- J3 pin list
| 1 | Day&Night Signal In |
| 2 | GND |
| 3 | NC |
- J4 pin list
| 1 | IRCUT1 |
| 2 | IRCUT2 |
5 Imaging Effect
- veye-mipi-327 vs. veye-mipi-290 indoor light environment effect
- Raspberry pi platform veye-mipi-290 vs. The default camera ov5647 effect
6 CPU boards
Support a variety of platforms, as follows:
- Raspberry Pi
- Rockchip RK3399
- NVIDIA Jetson Nano
- NXP IMX8M :TODO