Difference between revisions of "VEYE-MIPI-290/327"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
===Features=== | ===Features=== | ||
| − | * 1/2.8 inch 2 Mega STARVIS sensor IMX290/IMX327 by SONY | + | *1/2.8 inch 2 Mega STARVIS sensor IMX290/IMX327 by SONY |
| − | * LVDS output: 7:1 interface (VEYE-LVDS-290/VEYE-LVDS-327 support) | + | *LVDS output: 7:1 interface (VEYE-LVDS-290/VEYE-LVDS-327 support) |
| − | * MIPI output: CSI-2 | + | *MIPI output: CSI-2 (VEYE-MIPI-290/VEYE-MIPI-327 support) |
| − | * Uncompressed UYVY format, YUV422-8bit | + | *Uncompressed UYVY format, YUV422-8bit |
| − | * Standard lens mount | + | *Standard lens mount |
| − | * IR-CUT circuit | + | *IR-CUT circuit |
| − | * BLC, DOL-WDR, 2D/3D noise reduction, Anti-fog | + | *BLC, DOL-WDR, 2D/3D noise reduction, Anti-fog |
| − | * Brightness, Contrast, Sharpness, Saturation adjustable | + | *Brightness, Contrast, Sharpness, Saturation adjustable |
| − | * Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, TK1 | + | *Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, TK1 |
| + | |||
| + | [[File:VEYE-MIPI-290327-FRONT.jpg|thumb|front]] | ||
| + | [[File:VEYE-MIPI-290327-back.jpg|thumb|back]] | ||
===Thechnical Detail=== | ===Thechnical Detail=== | ||
| Line 110: | Line 113: | ||
|38mm*38mm*8mm(not include lens and lens mount) | |38mm*38mm*8mm(not include lens and lens mount) | ||
|} | |} | ||
| + | [[File:VEYE-290327-用户接口实物图.png|thumb|connector position]] | ||
| + | [[File:VEYE-290-327用户接口丝印图.png|thumb|pin number]] | ||
| + | [[File:VEYE-MIPI-尺寸图-后视.png|thumb|dimension]] | ||
===Diagram, Layout and Dimension=== | ===Diagram, Layout and Dimension=== | ||
Revision as of 17:43, 12 July 2019
1 Introduction
Veye-mipi-290/327 is a camera module designed by Tianjin Zhongan Yijia technology co., LTD., with excellent low illumination and wide dynamic.This module only has 38*38*8mm, which is convenient for integration and can be connected to various embedded motherboards with adapter board.Suitable for machine vision, intelligent analysis, industrial control, face recognition, ADAS etc...
2 Features
- 1/2.8 inch 2 Mega STARVIS sensor IMX290/IMX327 by SONY
- LVDS output: 7:1 interface (VEYE-LVDS-290/VEYE-LVDS-327 support)
- MIPI output: CSI-2 (VEYE-MIPI-290/VEYE-MIPI-327 support)
- Uncompressed UYVY format, YUV422-8bit
- Standard lens mount
- IR-CUT circuit
- BLC, DOL-WDR, 2D/3D noise reduction, Anti-fog
- Brightness, Contrast, Sharpness, Saturation adjustable
- Support Raspberry PI, FPGA, ZYNQ, RK3288, RK3399, TK1
3 Thechnical Detail
| Technical Details | |
| SENSOR | |
| Sensor | SONY IMX290LQR-C/IMX327LQR-C STARVIS |
| Pixels | 2.13M pixels |
| Resolution | 1920*1080 |
| Image Size | Diagonal 6.46 mm (Type 1/2.8) |
| Unit Cell Size | 2.9um (H)*2.9um(V) |
| ISP | |
| Frame Rate | 1080p@25 / 1080p@30fps |
| Exposure | Auto or Manual |
| White Balance | Auto or Manual |
| Shutter | 1/25(1/30)s to 1/50,000s |
| Slow Shutter | Support |
| Denoising | 2D/3D noise reduction |
| Image Setting | Brightness, Contrast, Sharpness, Saturation,Flip, Mirror |
| Image Enhancement | BLC, DOL-WDR, Defog |
| Day/Night Switch | Manual or IR-CUT filter with external trigger |
| Lens & IR-CUT | |
| Lens | Support M12*0.5 or M16*0.5 depend on lens mount |
| Lens Mount with IR-CUT | MTV12 or MTV16 |
| Mounting Hole | 2 screw holes with diameter of 2.2mm,20mm Center-to-Center Spacing |
| Interface | |
| PCB Connector | BTB connector:BTB050040-F1D |
| Communication Interface | IIC, 3.3VDC |
| Video Data Interface | LVDS:3 Data Lanes, Bandwidth 1.5582Gbps or
MIPI:2 Data Lanes, CSI2 YUV422-8bit Data Type, Bandwidth 1.188Gbps |
| IR-CUT Control | IR-CUT motor control, 3.3VDC |
| Day/Night External Trigger | 3.3VDC to 12VDC compatibility |
| General | |
| Operating Conditions | -10℃-50℃, Humidity 95% or less, non-condensing |
| Power Supply | 3.3VDC |
| Power Consumption | 3.3VDC,1.2W |
| Dimension | 38mm*38mm*8mm(not include lens and lens mount) |
File:VEYE-290327-用户接口实物图.png
connector position
File:VEYE-290-327用户接口丝印图.png
pin number
File:VEYE-MIPI-尺寸图-后视.png
dimension
4 Diagram, Layout and Dimension