Difference between revisions of "ADP-U2 Adapter Board Data Sheet"
Jump to navigation
Jump to search
| Line 20: | Line 20: | ||
|[[File:ADP-N1-6CAM 001.jpg|alt=|center|thumb|200x200px|'''SKETCH MAP''']] | |[[File:ADP-N1-6CAM 001.jpg|alt=|center|thumb|200x200px|'''SKETCH MAP''']] | ||
|} | |} | ||
| − | [[File:ADP- | + | [[File:ADP-U2-T-PinList.jpg|alt=|thumb|600x600px|ADP-U1 J1 PINLIST]] |
| − | [[File:ADP- | + | [[File:ADP-U2-B-PinList.jpg|alt=|thumb|600x600px|ADP-U2 J3 PINLIST]] |
==Adapter Board Pinlist== | ==Adapter Board Pinlist== | ||
Revision as of 15:15, 14 April 2020
Adapter Board:ADP-U2 Data Sheet
1 Introduction
The function of ADP-U2 is to convert the B2B40 interface of the VEYE-MIPI-327 camera module to the FPC28 interface of ADP-N1(a camera interposer module for AGX Xavier/TX2 DevKit).
2 Product Picture
| PART NUMBER / 型号 | FRONT VIEW / 正面图片 | BACK VIEW / 背面图片 | FFC CABLE/FFC线缆 | SKETCH MAP/示意图 |
| ADP-U2 |
3 Adapter Board Pinlist
| 1 | GND | |
| 2 | RESERVE | Not Connected |
| 3 | RESERVE | Not Connected |
| 4 | GND | |
| 5 | RESERVE | Not Connected |
| 6 | RESERVE | Not Connected |
| 7 | GND | |
| 8 | MIPI_CK_P | |
| 9 | MIPI_CK_N | |
| 10 | GND | |
| 11 | MIPI_L1_P | |
| 12 | MIPI_L1_N | |
| 13 | GND | |
| 14 | MIPI_L0_P | |
| 15 | MIPI_L0_N | |
| 16 | GND | |
| 17 | IO_EXT0 | Not Connected |
| 18 | IO_EXT1 | Not Connected |
| 19 | GND | |
| 20 | SCL | 3.3V LEVEL |
| 21 | SDA | 3.3V LEVEL |
| 22 | GND | |
| 23 | IO_EXT2 | Not Connected |
| 24 | IO_EXT3 | Not Connected |
| 25 | VCC3V3 | |
| 26 | VCC3V3 | |
| 27 | VCC3V3 | |
| 28 | GND |
| 1 | IO_EXT3 | Connected (in-board) to J1 pin 24 |
| 2 | GND | |
| 3 | IO_EXT2 | Connected (in-board) to J1 pin 23 |
4 Adapter Board Dimension
