Difference between revisions of "Adapter Board for Raspberry Pi/zh"
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
*可通过1.0mm间距FFC异面线连接J2接口以及树莓派上的CAM接口来实现VEYE-MIPI-290/327 摄像头模组同经典树莓派的对接。 | *可通过1.0mm间距FFC异面线连接J2接口以及树莓派上的CAM接口来实现VEYE-MIPI-290/327 摄像头模组同经典树莓派的对接。 | ||
| − | *也可通过0.5mm间距FFC异面线连接J9接口以及树莓派Computer Module上的CAM接口来实现VEYE-MIPI-290/327 摄像头模组同树莓派Computer Module的对接。[[File:VEYEboardjin.jpg|thumb|485x485px| | + | *也可通过0.5mm间距FFC异面线连接J9接口以及树莓派Computer Module上的CAM接口来实现VEYE-MIPI-290/327 摄像头模组同树莓派Computer Module的对接。[[File:VEYEboardjin.jpg|thumb|485x485px|用户接口实物图(前视图）]] |
===增强版转接板接口布局=== | ===增强版转接板接口布局=== | ||
| + | <br /> | ||
| − | + | *'''用户接口，板间连接器J9引脚列表''' | |
{| class="wikitable" | {| class="wikitable" | ||
| Line 70: | Line 71: | ||
|22 | |22 | ||
|GND | |GND | ||
| − | |} | + | |}<br />[[File:VeyeRaspberryPi Ultra B334.jpg|thumb|485x485px|用户接口实物图（后视图）]]<br /> |
| − | + | *'''用户接口，板间连接器J2引脚列表''' | |
| − | |||
{| class="wikitable" | {| class="wikitable" | ||
| Line 116: | Line 116: | ||
| | | | ||
| | | | ||
| − | |} | + | |}<br /> |
| − | + | *'''用户接口，板间连接器J4引脚列表''' | |
{| class="wikitable" | {| class="wikitable" | ||
| Line 127: | Line 127: | ||
|2 | |2 | ||
|GND | |GND | ||
| − | |} | + | |}<br /> |
| − | + | *'''用户接口，板间连接器J1引脚列表''' | |
{| class="wikitable" | {| class="wikitable" | ||
Revision as of 14:27, 24 July 2019
增强版转接板说明
1 概述
增强版转接板通过板到板连接器连接VEYE-MIPI-290/327 摄像头模组，可以同经典树莓派以及树莓派Computer Module实现对接。
- 可通过1.0mm间距FFC异面线连接J2接口以及树莓派上的CAM接口来实现VEYE-MIPI-290/327 摄像头模组同经典树莓派的对接。
- 也可通过0.5mm间距FFC异面线连接J9接口以及树莓派Computer Module上的CAM接口来实现VEYE-MIPI-290/327 摄像头模组同树莓派Computer Module的对接。
2 增强版转接板接口布局
- 用户接口，板间连接器J9引脚列表
| 1 | MIPI_L0_N | 2 | MIPI_L0_P |
| 3 | GND | 4 | MIPI_L1_N |
| 5 | MIPI_L1_P | 6 | GND |
| 7 | MIPI_CK_N | 8 | MIPI_CK_P |
| 9 | GND | 10 | CN |
| 11 | CN | 12 | GND |
| 13 | CN | 14 | CN |
| 15 | GND | 16 | ENABLE |
| 17 | RST_TEST | 18 | GND |
| 19 | Triggerln_SCL | 20 | TriggerOut_SDA |
| 21 | CN | 22 | GND |
- 用户接口，板间连接器J2引脚列表
| 1 | MIPI_L0_N | 2 | MIPI_L0_P |
| 3 | GND | 4 | MIPI_L1_N |
| 5 | MIPI_L1_P | 6 | GND |
| 7 | MIPI_CK_N | 8 | MIPI_CK_P |
| 9 | GND | 10 | ENABLE |
| 11 | RST_TEST | 12 | Triggerln_SCL |
| 13 | TriggerOut_SDA | 14 | CN |
| 15 | GND |
- 用户接口，板间连接器J4引脚列表
| 1 | +5V |
| 2 | GND |
- 用户接口，板间连接器J1引脚列表
| 1 | RESERVE, Not Connected | 2 | RESERVE, Not Connected |
| 3 | GND | 4 | RESERVE, Not Connected |
| 5 | MIPI_L3_P | 6 | RESERVE, Not Connected |
| 7 | MIPI_L3_N | 8 | RESERVE, Not Connected |
| 9 | GND | 10 | GND |
| 11 | MIPI_L2_P | 12 | RESERVE, Not Connected |
| 13 | MIPI_L2_N | 14 | RESERVE, Not Connected |
| 15 | GND | 16 | GND |
| 17 | MIPI_CK_P | 18 | SCL_3.3V |
| 19 | MIPI_CK_N | 20 | SDA_3.3V |
| 21 | GND | 22 | RESERVE, Not Connected |
| 23 | MIPI_L1_P | 24 | RESERVE, Not Connected |
| 25 | MIPI_L1_N | 26 | RESERVE, Not Connected |
| 27 | GND | 28 | RESERVE, Not Connected |
| 29 | MIPI_L0_P | 30 | RESERVE, Not Connected |
| 31 | MIPI_L0_N | 32 | RESERVE, Not Connected |
| 33 | GND | 34 | GND |
| 35 | GND | 36 | GND |
| 37 | VCC3V3 | 38 | VCC3V3 |
| 39 | VCC3V3 | 40 | VCC3V3 |