Difference between revisions of "C-MOUNT01"
Jump to navigation
Jump to search
Line 25: | Line 25: | ||
the lens needs to be slightly adjusted away from the sensor. The specific value needs to be determined according to the sensor's imaging surface height. | the lens needs to be slightly adjusted away from the sensor. The specific value needs to be determined according to the sensor's imaging surface height. | ||
+ | {| class="wikitable" | ||
+ | !Not adjusted / 未调整 | ||
+ | !Adjusted / 向外调整 | ||
+ | |- | ||
+ | |[[File:C MOUNT-LENS 02.jpg|thumb]] | ||
+ | |[[File:C MOUNT-LENS 01.jpg|thumb]] | ||
+ | |} | ||
<br /> | <br /> | ||
==Dimension 尺寸图== | ==Dimension 尺寸图== |
Revision as of 09:28, 14 March 2024
1 Product Picture 产品图片
Product Picture 产品图片 | Product Picture 产品图片 | Camera Support 支持的相机 |
MV-MIPI-IMX178M |
2 Attention 注意事项
C-MOUNT01仅仅是一个C-MOUNT镜头固定座,为了适配MV系列和RAW系列的,实际后焦距离略小于17.5mm,配合不同型号的摄像机模组,需要将镜头略微向远离传感器的方向调整。具体数值需要根据传感器的成像面高度决定。
C-MOUNT01 is only a C-MOUNT lens mount. In order to fit the MV series and RAW series, the actual rear focal distance is slightly less than 17.5mm. With different camera modules,
the lens needs to be slightly adjusted away from the sensor. The specific value needs to be determined according to the sensor's imaging surface height.
Not adjusted / 未调整 | Adjusted / 向外调整 |
---|---|
3 Dimension 尺寸图