Difference between revisions of "C-MOUNT01"
Jump to navigation
Jump to search
Line 45: | Line 45: | ||
!Part NO. / 型号 | !Part NO. / 型号 | ||
+ | !D | ||
!Adjusting Distance (mm) / 调节值A(mm) | !Adjusting Distance (mm) / 调节值A(mm) | ||
|- | |- | ||
|[[MV-MIPI-IMX296M Index|MV-MIPI-IMX296M]] | |[[MV-MIPI-IMX296M Index|MV-MIPI-IMX296M]] | ||
+ | |0.92 | ||
|0.446 | |0.446 | ||
|- | |- | ||
|[[MV-MIPI-IMX178 Index|MV-MIPI-IMX178M]] | |[[MV-MIPI-IMX178 Index|MV-MIPI-IMX178M]] | ||
+ | |0.92 | ||
|0.446 | |0.446 | ||
|- | |- | ||
| | | | ||
[[MV-MIPI-IMX265M Index|MV-MIPI-IMX265M]] | [[MV-MIPI-IMX265M Index|MV-MIPI-IMX265M]] | ||
+ | |0.92 | ||
|0.446 | |0.446 | ||
|- | |- | ||
| | | | ||
[[MV-MIPI-IMX264M Index|MV-MIPI-IMX264M]] | [[MV-MIPI-IMX264M Index|MV-MIPI-IMX264M]] | ||
+ | |0.92 | ||
|0.446 | |0.446 | ||
|- | |- | ||
| | | | ||
[[MV-MIPI-IMX287M Index|MV-MIPI-IMX287M]] | [[MV-MIPI-IMX287M Index|MV-MIPI-IMX287M]] | ||
+ | |0.92 | ||
|0.446 | |0.446 | ||
|- | |- | ||
| | | | ||
[[RAW-MIPI-IMX462M Index|RAW-MIPI-IMX462M]] | [[RAW-MIPI-IMX462M Index|RAW-MIPI-IMX462M]] | ||
+ | |0.62 | ||
|0.146 | |0.146 | ||
|- | |- | ||
|[[MV-MIPI-SC130M Index|MV-MIPI-SC130M]] | |[[MV-MIPI-SC130M Index|MV-MIPI-SC130M]] | ||
+ | |0.6 | ||
|0.126 | |0.126 | ||
|} | |} |
Revision as of 10:45, 14 March 2024
1 Product Picture 产品图片
Product Picture 产品图片 | Product Picture 产品图片 | Camera Support 支持的相机 |
MV-MIPI-IMX178M |
2 Attention 注意事项
C-MOUNT01仅仅是一个C-MOUNT镜头固定座,为了适配MV系列和RAW系列的,实际后焦距离略小于17.526mm,配合不同型号的摄像机模组,需要将镜头略微向远离传感器的方向调整。具体数值需要根据传感器的成像面高度决定。
C-MOUNT01 is only a C-MOUNT lens mount. In order to fit the MV series and RAW series, the actual rear focal distance is less than 17.526mm. With different camera modules,
the lens needs to be adjusted away from the sensor. The specific value needs to be determined according to the sensor's imaging surface height.
Not adjusted / 未调整 | Adjusted / 向外调整 |
---|---|
2.1 调节值A(参考尺寸图)的计算:
A = C - ( H - D )
标准C-MOUNT像距 :C = 17.526mm
C-MOUNT01高度:H= 18mm
传感器底面到实际感光面的距离:D
Part NO. / 型号 | D | Adjusting Distance (mm) / 调节值A(mm) |
---|---|---|
MV-MIPI-IMX296M | 0.92 | 0.446 |
MV-MIPI-IMX178M | 0.92 | 0.446 |
0.92 | 0.446 | |
0.92 | 0.446 | |
0.92 | 0.446 | |
0.62 | 0.146 | |
MV-MIPI-SC130M | 0.6 | 0.126 |
3 Dimension 尺寸图